COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS EtherNID EE Ethernet Services Demarcation Point Key features The growing demand for Ethernet Services is exploding everywhere. Carriers contending in this competitive market space are faced with several challenges: • Setting a clear Demarcation Point between the Customers' and the Carriers' Ethernet Network • Implementing Operations, Administration and Maintenance (OAM), to reduce OPEX and minimize truck-roll • Assuring End-to-End Service Level Agreement (SLA) parameters • Offering Carrier-Grade Reliability All of this while avoiding any impact on network performance and keeping CAPEX at a minimum The Accedian EtherNID™ EE Demarcation Device (EDD) offers the solution to these challenges by implementing standardsbased OAM and loop-back capabilities. Providing a Performance Assurance Agent™ (PAA™) allows measuring and tracking End-to-End SLA parameters such as Latency,Jitter,Packet Loss and Availability in a continuous manner,while the service is running. Acting as an electrical port extension to basement-located Access Platforms the EtherNID™ EE is the ideal vehicle to define a clear network boundary at the customer premises of multitenant commercial environments.The EtherNID™ is also used at inter-carrier handoff points to sectionalize E-Lines that span across multiple service providers, thus eliminating finger pointing. Furthermore, the EtherNID™ EE's high-performance Fast-Thru™ engine minimizes intrinsic packet-jitter and latency of the device, thus allowing the deployment of multiple units along an End-to-End Ethernet Service Path without introducing any significant latency or jitter to the service itself. The EtherNID™ EE's ports can also be configured for Monitoring where external test devices can be connected to perform non-intrusive, in-service troubleshooting, thus offering Layer 1 to 4 visibility in each direction independently or combined, a function that carriers are used-to with traditional demarcation devices but lacking from current Ethernet service delivery methods. Furthermore, intelligent wire-speed filters can be applied to selectively monitor specific traffic. Additionally,the EtherNID™ EE can be optionally line-powered using Power over Ethernet (PoE) and offers a fail-over bypass circuitry (electrical) for added reliability. The EtherNID™ EE interacts seamlessly with Ethernet OAM compliant devices, supports SNMP, comes with an embedded Web GUI and can be optionally managed via a Management VLAN. Designed very cost effectively for volume deployment,the EtherNID™ EE unlocks the businesscase for High-Performance,manageable Metro Ethernet service delivery in the last-mile. WEBSITE: www.jdsu.com ETHERNID EE 2 Features and Benefits Ethernet OAM & loop-backs Better visibility,easier maintenance,reduced truck-rolls Dual Tap/Monitoring ports Allows non-intrusive Monitoring Access to live traffic,avoids chasing“ghosts” Traffic Filtering/Policing Allows blocking unwanted traffic types (e.g. BPDU/STP/L2CP) and controlling which VLANs are allowed Per-Flow Statistics Allows tracking bandwidth utilization of every stream/EVC delivered ETHERNID EE 3 Applications • Customer Premises Located Intelligent Ethernet Demarcation Device • Inter-Carrier Handoff Demarcation • End-to-End SLA-Meter™ • Intelligent extension to Metro Access Platforms • Wire-speed Remote Loop-back responder to Portable or Centralized Ethernet Test-sets • Intelligent Wire-speed Ethernet Monitor/Tap troubleshooting device Multi-carrier Performance Assurance Agent™ (PAA™) Application • Assures in-service, End-to-End SLA across Multi-Vendor/Multi-Carrier and Layer 1-2-3 networks Business Multi-Tenant Building Application NID Accedian EtherNID™ CPE Customer Provided Equipment ETHERNID EE 4 Specifications Network-side interface 10/100BaseTX Connector: RJ-45 (Auto-negotiation/Auto MDIX) Client-side interface 10/100BaseTX Connector: RJ-45 (Auto-negotiation/Auto MDIX) NID features IEEE 802.3ah Ethernet OAM Implements a Two-Port MAC Relay (TPMR) function aligned with IEEE's 802.1aj, 802.1ad, and 802.1ag/ITU-T Y.1731 drafts Loop-backs: –– Layer 1, Layer 2 (MAC Swap), Layer 3 (IP Swap), Layer 4 (TCP/UDP Port Swap) – Automatically reacts to in-band loop-back commands of industry-popular Ethernet testsets – Individual VLAN loop-backs – Loop-back on specific MAC source and/or destination address – Loop-back on specific IP source and/or destination address Thru-Traffic Per-flow statistics (per VLAN, per Ethertype, per ToS, per CoS, per MAC, per IP, etc.) VLAN Tagging/De-tagging VLAN Stacking (.1Q in .1Q) Through Traffic Wire-Speed Filtering (L2CP, BPDU, per-VLAN, Ethertype, Protocol type,MAC, IP,User Defined) Dual Monitor Access Ports providing individual access to both ignal directions, combined access to both directions, Layer 1 apping and intelligent filtering Integrated Copper TDR cable integrity testing Dying Gasp (via 802.3ah or SNMP traps) Supports packet sizes up to 1800 bytes Fault Propagation Performance Assurance Agent™ (PAA™) Constant in-service monitoring of SLA parameters including: Packet loss – Two-way delay (Round-trip Latency) – Two-way delay variation (Round-trip Jitter) – One-way delay variation (One-way Jitter) – Continuous End-to-End path Continuity Check High Precision measurements: 1 microsecond accuracy Management In-band remote management over the Ethernet customer line via Network-side interface Local Management craft port: 10/100BaseT, RJ-45 connector Serial RS-232 Management port: RJ-45 connector Secure Web GUI via SSL Secure CLI command prompt via SSH Works at Layer 2 and Layer 3 SNMP V1,V2C Assures SLAs per VLAN/per CoS/per ToS/per EVC Management VLAN Can work in point-to-point or point-to-multipoint NTP client Multiple Instance capable (Multi-SLA™) Radius Authentication User settable SLA threshold crossing alerts using SNMP traps DNS Client Inline transparent performance Throughput: wire-speed (100Mb/s at 100% utilization) Intrinsic Passthrough Traffic Latency: <8 microsecond (at all packet sizes) 802.3ah EFM OAM Remote and Local Syslog DHCP Client Config. import/export FTP,TFTP, SFTP, HTTP Power options all included as standard and redundant between each other Intrinsic Passthrough Traffic Jitter: <1 microsecond (at all packet sizes) External AC/DC adapter (120-240 Vac autosensing, 50-60 Hz), 5 Vdc input to unit Intrinsic Latency for Intelligent Loopback: <8 microsecond (at all packet sizes) Dual (A/B) -48Vdc Central Office Supply inputs Intrinsic Jitter for Intelligent Loopback: <1 microsecond (at all packet sizes) Power Consumption: 5 watts Optional Network-Client Power Fail-over bypass mode Physical 1.60" H x 5.34" W x 5.80" D Mounting: – Desktop – Wall-mount – Rack-mount (2 units side-by-side in 1U) – 12 position, high-density, 19” central office shelf (4U): EtherSHELF™ PoE from RJ-45 (802.3af ) Cooling: convection cooled (no fans) Regulatory IEC 60950 FCC Part 15 Class A Industry Canada CS-03 CE Mark Operating Temperature 0-50 degree C Storage Temperature -40 to 70 degree C Humidity 5-95% non-condensing ETHERNID EE Model number Product name Description ACC701-000 EtherNID™ EE 10/100Mb/s Electrical-to-Electrical Ethernet Demarcation Device. Accessories ACC704-000 EtherSHELF™ Rackmount 4U Vertical Mounting Shelf, fits 12 EtherNID™ units individually fused, -48V (A/B) redundant power feeds, can mix and match EE, OE, and GE models. ACC706-000 2 Unit Rackmount Bracket Rackmount 1U Horizontal Mounting Bracket, fits 2 EtherNID™ units. ACC705-000 1 Unit Rackmount Bracket Rackmount 1U Horizontal Mounting Bracket, fits 1 EtherNID™ unit. EtherNID EE Related products ACC703-000 EtherNID™ GE 10/100/1000Mb/s Ethernet Demarcation Device. ACC702-000 EtherNID™ OE 10/100Mb/s Optical to Electrical Ethernet EtherNID GE EtherNID OE Test & Measurement Regional Sales All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its applications. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. © 2006 JDS Uniphase Corporation. All rights reserved. 30149050 001 0707 ETHERNIDEE.DS.CPO.TM.AE NORTH AMERICA LATIN AMERICA ASIA PACIFIC TEL: 1 866 228 3762 FAX: +1 301 353 9216 TEL:+55 11 5503 3800 FAX:+55 11 5505 1598 TEL:+852 2892 0990 FAX:+852 2892 0770 EMEA TEL:+49 7121 86 2222 FAX:+49 7121 86 1222 WEBSITE: www.jdsu.com