JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50SA-248 SWITCH ASSEMBLY Frequency Range DC-18 GHz Configuration Two 1P2T Failsafe Electromechanical RF Switches Impedance 50 Ohms nominal VSWR 1.10:1 1.15:1 1.20:1 1.30:1 1.35:1 Insertion Loss 0.10 0.15 0.20 0.30 0.35 Isolation 85 80 70 65 60 RF Input Power (cold switched) 400 Watts average DC-200 MHz 300 Watts average 200-500 MHz 200 Watts average 500-1000 MHz 100 Watts average 1-4 GHz 90 Watts average 4-8 GHz 70 Watts average 8-12 GHz 60 Watts average 12-18 GHz Switching Speed 15 milliseconds (after command is received and processed) (3 milliseconds typical processing time) Manual Control Keypad and LCD display Remote Control Ethernet (10/100) and RS-232 Remote Commands Set Switch Read Switch Identification Change Baud Rate AC Supply 100-240 VAC @ 47-63 Hz maximum maximum maximum maximum maximum dB dB dB dB dB dB dB dB dB dB maximum maximum maximum maximum maximum minimum minimum minimum minimum minimum --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F DC-1 GHz 1-4 GHz 4-8 GHz 8-12 GHz 12-18 GHz DC-1 GHz 1-4 GHz 4-8 GHz 8-12 GHz 12-18 GHz DC-1 GHz 1-4 GHz 4-8 GHz 8-12 GHz 12-18 GHz (SSx y) (RSx) (IDN) (CBx) JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50SA-248 SWITCH ASSEMBLY RF Connector SMA female Operating Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-6399 ECR/ECN # Page 2 of 2 DATE 12/09/2009 REV APPR / DATE TRS 12/09/2009 ECR/ECN # JFW FORM E-7-F REV F DATE REV APPR / DATE