"High Frequency Ceramic Solutions" 3.5 GHz Low Pass Filter P/N 3550LP14A300 Detail Specification: 08/19/05 Page 1 of 2 General Specifications Part Number 3550LP14A300 Impedance 50 Ω Frequency (MHz) 3400 - 3700 Operating Temperature Insertion Loss 0.65 dB max. Reel Quantity -40 to +85°C 4,000 Return Loss 14 dB min. Input Power 3 Watts max. Attenuation (min.) 25 dB @ 2 x fo Attenuation (min.) 25 dB @ 3 x fo Terminal Configuration Termination Style 100% Tin Suffix = "None" eg. 3550LP14A300 Tin / Lead Suffix = "/Pb" eg. 3550LP14A300/Pb No. Function 1 GND 2 IN 3 GND 4 GND Mechanical Dimensions In L 0.063 ± 0.004 W 0.031 ± 0.004 T 0.024 ± 0.004 a 0.008 ± 0.004 b 0.008 +.004/-.006 c 0.006 ± 0.004 g 0.012 ± 0.004 p 0.020 ± 0.002 mm 1.60 ± 0.10 W 0.80 ± 0.10 0.60 ± 0.10 0.20 ± 0.10 0.20 +0.1/-0.15 c L a 5 OUT 6 GND p 0.15 ± 0.10 0.30 ± 0.10 T g 0.50 ± 0.05 b Mounting Considerations Mount these devices with brown mark facing up. Line width should be designed to provide 50Ω impedance matching characteristics. Units: mm 0.55 Solder Resist 0.25 * * Land Through-hole (φ0.35) 0.25 0.25 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 931 Via Alondra • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2003 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 3.5 GHz Low Pass Filter P/N 3550LP14A300 Detail Specification: 08/19/05 Page 2 of 2 Typical Electrical Performance (T=25°C) ) ) ) ) ) ) ) 0 ) ) ) ) ) Insertion/Return Loss ) ) ) ) ) ) ) -10 ) ) S22 (dB) ) ) ) S11 (dB) -20 -30 ) ) ) ) -40 ) ) ) ) ) ) ) ) ) S12 (dB) ) ) ) ) ) -50 -60 0 2 4 6 8 10 12 freq, GHz ) ) ) ) ) ) ) ) ) ) ) ) ) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 931 Via Alondra • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2003 Johanson Technology, Inc. All Rights Reserved