3.2x2.4mm RIGHT ANGLE SMD CHIP LED LAMP APEKA3224SGC Features SUPER BRIGHT GREEN Description 3.2mmx2.4mm RIGHT ANGLE SMT LED, 2.4mm THICKNESS. The Super Bright Green source color devices are made LOW POWER CONSUMPTION. with Gallium Phosphide Green Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB9029 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1204000010 Selection Guide Part No. Dice APEKA3224SGC Iv (mcd) @ 20 mA Lens Type SUPER BRIGHT GREEN (GaP) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 7 20 90° Units Test Conditions Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength Super Bright Green 565 nm IF=20mA λD Dominant Wavelength Super Bright Green 568 nm IF=20mA ∆λ1/2 Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB9029 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1204000010 Super Bright Green APEKA3224SGC SPEC NO: DSAB9029 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1204000010 APEKA3224SGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB9029 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1204000010 PACKING & LABEL SPECIFICATIONS APEKA3224SGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB9029 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1204000010