56.8mm (2.3 INCH) 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Part Number: PSC23-11EWA Features HIGH EFFICIENCY RED Description 2.3 INCH CHARACTER HEIGHT. The High Efficiency Red source color devices are LOW CURRENT OPERATION. made with Gallium Arsenide Phosphide on Gallium HIGH CONTRAST AND LIGHT OUTPUT. Phosphide Orange Light Emitting Diode. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. MECHANICALLY RUGGED. STANDARD : GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2413 REV NO: V.9 DATE:JUN/01/2007 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000146 Selection Guide Dice Part No. PSC23-11EWA Iv (ucd) [1] @ 10mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) WHITE DIFFUSED Min. Typ. 1900 8000 Description Common Cathode, Rt. Hand Decimal. Note: 1. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA λD[1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz C A1,A2,D1,D2,P,K VF[2] Forward Voltage 4.0 B,C,E,F,G,H,J,L,M,N 5.0 High Efficiency Red DP V 2.0 2.5 A1,A2,D1,D2,P,K IR Reverse Current B,C,E,F,G,H,J,L,M,N IF=20mA 10 20 10 High Efficiency Red DP uA VR = 10V VR = 10V VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter A1,A2,D1,D2,P,K Power dissipation B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K DC Forward Current B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Peak Forward Current [1] B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Reverse Voltage B,C,E,F,G,H,J,L,M,N DP Operating / Storage Temperature High Efficiency Red Units 150 300 75 mW 30 60 30 mA 160 320 160 mA 10 10 5 V -40°C To +85°C Lead Solder Temperature [2] 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2413 REV NO: V.9 DATE:JUN/01/2007 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000146 High Efficiency Red PSC23-11EWA Note:the curves are on the DP. SPEC NO: DSAD2413 REV NO: V.9 DATE:JUN/01/2007 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000146 Note:the curves are on the segment b,c,e,f,g,h,j,l,m,n. SPEC NO: DSAD2413 REV NO: V.9 DATE:JUN/01/2007 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000146 Note:the curves are on the segment a1,a2,d1,d2,p,k. SPEC NO: DSAD2413 REV NO: V.9 DATE:JUN/01/2007 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000146 PACKING & LABEL SPECIFICATIONS PSC23-11EWA SPEC NO: DSAD2413 REV NO: V.9 DATE:JUN/01/2007 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN:Z.Z.YANG ERP: 1311000146