KNOWLES SPU0409LE5H-BQ

SPU0409LE5H-QB
TM
Zero Height "Ultra-Mini" SiSonic Microphone Specification
With Enhanced RF Protection - Halogen Free
Knowles Acoustics
1151 Maplewood Drive
Itasca, IL 60143
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 1 of 10
SPU0409LE5H-QB
1. DESCRIPTION AND APPLICATION
1.1 DESCRIPTION
Zero Height "Ultra-mini" Surface Mount Silicon
Microphone with Enhanced RF Protection - Halogen Free
1.2 APPLICATION
Hand held consumer electronic devices
2. PART MARKING
Identification Number Convention
S
1
2
3
4
5
6
7
S: Manufacturing Location
"S" - Knowles Electronics Suzhou
Suzhou, China
"No Alpha Character" - Knowles Electronics
Itasca, IL USA
"E" - Engineering Samples
Digits 1-7: Job Identification Number
3. TEMPERATURE RANGE
3.1 Operating Temperature Range: -40 C to +100 C
3.2 Storage Temperature Range: -40 C to +100 C
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 2 of 10
SPU0409LE5H-QB
4. ACOUSTIC & ELECTRICAL SPECIFICATIONS
TEST CONDITIONS: +20 C, 60-70% R.H.
5. FREQUENCY RESPONSE CURVE
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 3 of 10
SPU0409LE5H-QB
6. MECHANICAL SPECIFICATIONS
"W"
1.932
0.966
0.534
"H"
0.612
0.723
(2X)
5
1
1
2.635 2.102 4
(3X)
"L"
0.635
(2X)
3
1.224
"AP"
0.612
6
2
0.485
1.015
2.031
0.562
(2X)
Note:
Dimensions are in milimeters unless otherwise specified.
Tolerance
0.15mm unless otherwise specified.
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 4 of 10
SPU0409LE5H-QB
7. RECOMMENDED CUSTOMER LAND PATTERN
0.612
0.966
(2X)
0.723
(2X)
5
1
4
2.102
(3X)
1.224
0.612
0.635
(2X)
2
3
0.562
(2X)
6
1.015
(2X)
8. RECOMMENDED SOLDER STENCIL PATTERN
0.150
(4X)
45°
45°
Refer to recommended land
pattern for dimensions not shown.
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 5 of 10
SPU0409LE5H-QB
9. RECOMMENDED INTERFACE CIRCUIT
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 6 of 10
SPU0409LE5H-QB
10. PACKAGING DETAIL
2.00±0.05
1.75±0.10
12.0±0.3
8.00±0.10
4.00
0.30±0.05
1.30±0.10
A
+0.1
1.5
0.0
5.50±0.05
3.40±0.10
4.16±0.10
A
+0.1
1.5
0.0
PIN #1
COMPONENT
ORIENTATION
Note:
Dimensions are in milimeters
unless otherwise specified.
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 7 of 10
SPU0409LE5H-QB
11. SOLDER FLOW PROFILE
12. ADDITIONAL NOTES
(A)
(B)
(C)
(D)
(E)
(F)
(G)
Shelf life: Twelve (12) months when devices are to be stored in factory supplied,
unopened ESD moisture sensitive bag under maximum environmental conditions of
30ºC, 70% R.H.
MSL (moisture sensitivity level) Class 2a.
Do not pull a vacuum over port hole of the microphone. Pulling a vacum over the
port hole can damage the device.
Do not board wash after the reflow process. Board washing and cleaning agents
can damage the device. Do not expose to ultrasonic processing or cleaning.
Do not brush board after the reflow process. Brushing the board with/without
solvents can damage the device.
Do not insert any object in port hole of device at any time as this can damage the
device.
Number of reflow - Recommend no more than 3 cycles.
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 8 of 10
SPU0409LE5H-QB
13. RELIABILITY SPECIFICATIONS
Note: After test conditions are performed, the sensitivity of the microphone shall
not deviate more than 3dB from its initial value.
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 9 of 10
SPU0409LE5H-QB
14. SPECIFICATION REVISIONS
Revision
Detailed Specification Changes
Date
1
Preliminary Specification Release
6/25/2009
G
Updated to standard format. (DMS, C10109829)
7/9/2009
H
Update response curve (section 5). (DMS, C10110083) 7/20/2009
The information contained in this literature is based on our experience to date and is believed to be reliable and it is
subject to change without notice. It is intended as a guide for use by persons having technical skill at their own
discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use.
Dimensions contained herein are for reference purposes only. For specific dimensional requirements consult factory.
This publication is not to be taken as a license to operate under, or recommendation to infringe any existing
patents. This supersedes and voids all previous literature.
Knowles Acoustics, a division of Knowles Electronics, LLC.
Revision: H
Release Level: ACTIVE
Sheet 10 of 10