High Power TO-18 VCSEL for KVH-1885DDAN KVH-1885DDAN Description The KVH-1885DDAN consist of a ultra high power VCSEL in TO-18 dome lens package. The VCSEL has a high output power, low operating current and provides high optical performance. It emits parallel infrared lights. Features 10mW High power VCSEL 850㎚ Wavelength Range High Reliability Low Current and Voltage Other Configurations Available on Request Applications Free Space Optics Sensor Absolute Maximum Ratings Parameter Continuous Forward Current Continuous Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature *1 Symbol IF VR Topr Ratings 30 5 -40 ~ +85 -40 ~ +85 260 Tstg. Tsol. [Ta = 25°C ] Unit mA V °C °C °C *1 : Soldering Time ≤ 10 seconds (At a distance of 1 mm from the package). Electro-Optical Characteristics Parameter Symbol Min. Typ. Max. Unit Condition 5.0 mA CW 0.4 mW/mA IF=20mA 10 mW IF=20mA nm IF=20mA Threshold Current Ith Slope Efficiency η Optical Output Power Po Peak Wavelength λp Ith Temperature Variation ∆Ith 2.5 mA Ta=0 to 70°C η Temperature Coefficient ∆η/∆T -0.5 %/°C Ta=0 to 70°C at 20mA λp Temperature Coefficient ∆λp/∆T 0.06 nm/°C Ta=0 to 70°C at 20mA Spectral Bandwidth ∆λ 0.9 nm IF=20mA Forward Voltage Vf 2.2 V IF=20mA Breakdown Voltage Vb -10 Dynamic Resistance Rd 25 Beam Divergence Θ 2 0.2 840 1.6 850 1.9 860 V 40 Ω IF=20mA deg IF=20mA, FWHM * These specifications are subject to change without notice. 1/1 rev01 For more information on other parts available, please visit our website: www.kodenshi.co KODENSHI KOREA CORP.513-5 Eoyang-dong, Iksan,KOREA High Power TO-18 VCSEL for KVH-1885DDAN KVH-1885DDAN Outline Drawing Ordering information KVH PKG type Wavelength 46:TO46 56:TO56 18:TO18 KODENS 01:¢1 HI 02:¢2 VCSEL 03:¢3 High 05:¢5 power 65:650nm 78:780nm 85:850nm 98:980nm 31:1310nm 55:1550nm Output Power A: 0.3 mW B: 1mW C: 3mW D: 10mW E: 20mW PKG Method F:CAN with Flat Window B:CAN with Ball lens T: Tilted Window A: Aspherical lens D: Dome lens R: CAN With Receptacle C: Resin Port with Ceramic M :Resin Port with Metal T: Transfer Mold PKG L:Lamp Casting Mold Beam Divergence A: ±2 C: ±5 D: ±10 E: ±15 Pin Config. A:Cathode Common B:Anode Common C:CASE GND D:CASE Anode N: Normal 2/2 rev01 For more information on other parts available, please visit our website: www.kodenshi.co KODENSHI KOREA CORP.513-5 Eoyang-dong, Iksan,KOREA