KR Electronics, Inc. KR Electronics www.krfilters.com General Description Features • 32.5 MHz Lowpass • 50 Ω • DIP Package KR 2795 is a 32.5 MHz lowpass filter. The filter is designed for 50 Ω source and load impedance. Other passband frequencies, bandwidths and impedances are available. Please consult the factory. Typical Performance Passband Amplitude & Group Delay Overall Response (1 dB/div & 50 nsec/div) (10 dB/div) 11 Dec 2007 17:22:20 11 Dec 2007 17:21:38 CH1 CH2 1 S 21 S 21 log MAG delay 1 dB/ 50 ns/ CH1 REF 0 dB REF 0 s PRm PRm Cor Cor S 21 log MAG 10 dB/ REF 0 dB 2 PRm Cor START .100 000 MHz KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2007, KR Electronics, Inc. STOP 32.500 000 MHz START .100 000 MHz STOP 85.000 000 MHz Web Email Phone Fax www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 1 KR Electronics, Inc. www.krfilters.com KR 2795 Specifications Parameter Specification Filter type Lowpass Insertion Loss at 100 KHz < 0.2 dB Attenuation at 29 MHz < 1 dB Attenuation at 32.5 MHz 3 db ±1 dB Attenuation at 33.6 MHz 11 dB ± 2 dB Attenuation at 34.5 MHz 20 dB ± 3 dB Attenuation above 36.8 MHz Source & Load > 42 dB 50 Ω Physical Dimensions Metal Case Pin 1 is Input Pin 5 is Output All other Pins are Ground All leads .030” diameter Dimensions inches KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2007, KR Electronics, Inc. Web Email Phone Fax www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 2