LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TAPE AND REEL Pb Lead-Free Parts L8UG9033/TR2 DATA SHEET DOC. NO : QW0905-L8UG9033/TR2 REV. : A DATE : 18 - Sep. - 2007 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/7 PART NO. L8UG9033/TR2 Package Dimensions Cathode 2.5 0.4±0.1 2.0 0.5±0.1 5.8±0.5 ψ1.9 3.05± 0.5 1.4 2.8 0.7 4.3±0.5 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 0.3 6.43 9.3 12±0.3 5.5 Polarity 1.75 2.0 4.0 Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. ψ1.55 3.05 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/7 PART NO. : L8UG9033/TR2 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2±1.0 74.0±1.5 Part No. Description Quantity/Reel L8UG9033/TR2 12.0mm tape,7"reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/7 PART NO. L8UG9033/TR2 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT Green Forward Current IF 25 mA Peak Forward Current Duty 1/10@10KHz IFP 75 mA Power Dissipation PD 65 mW Ir 10 μA Electrostatic Discharge( * ) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Reverse Current @5V Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic * glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR PART NO MATERIAL Emitted L8UG9033/TR2 AlGaInP Green Dominant wave length λDnm Spectral halfwidth △λnm Lens Water Clear 574 20 Luminous Forward Viewing intensity voltage angle @20mA(V) @20mA(mcd) 2θ 1/2 (deg) Min. Max. Min. Typ. 1.7 450 2.6 Note : 1.The forward voltage data did not including ± 0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 300 20 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9033/TR2 Page 4/7 Typical Electro-Optical Characteristics Curve 8UG CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 2.0 Relative Intensity Normalize @20mA Forward Current(mA) 60 50 40 30 20 10 0 1.0 0 0 0.5 1.0 1.5 2.0 3.0 2.5 1.0 10 Fig.4 Relative Intensity vs. Temperature Relative Intensity @20mA Normalize @25℃ Forward Voltage@20mA Normaliz @25℃ Fig.3 Forward Voltage vs. Temperature 1.2 1.1 1.0 0.9 0.8 0 20 40 60 80 Relative Intensity @20mA Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0 550 600 Wavelength (nm) 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 Ambient Temperature( ℃) Ambient Temperature( ℃) 500 1000 Forward Current(mA) Forward Voltage(V) -20 100 650 80 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9033/TR2 Page 5/7 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150 ℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃ ) 240 Rising +5 ℃/sec Cooling -5℃/sec Preheat 150 120 60 ~ 120 sec Time 5sec 4. PB-Free Reflow Solder 1~5° C/sec Preheat 180~200 °C 1~5° C/sec 260° C MaX. 10sec.Max Above 220 °C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9033/TR2 Page 6/7 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH<60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH<60%, they should be treated at 60 ℃± 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L8UG9033/TR2 Page 7/7 Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95 % 3.t=1000hrs ±2hrs Endurance Test Thermal Shock Test Solderability Test Environmental Test Temperature Cycling IR Reflow 1.Ta=105 ℃±5 ℃&-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface 1.105 ℃ ~ 25 ℃ ~ -55 ℃ ~ 25 ℃ 30mins 5mins 30mins 5mins 2.10 Cyeles 1.T=260¢XC Max. 10sec.Max. 2. 6 Min MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020