LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only FOUR DIGIT LED DISPLAY (0.3 Inch) Pb Lead-Free Parts LFD3A5/63-XX/RP75-PF DATA SHEET DOC. NO : QW0905- LFD3A5/63-XX/RP75-PF REV. : DATE : 9 - Feb. - 2009 A 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/8 PART NO. LFD3A5/63-XX/RP75-PF Package Dimensions 30.4(1.197") PIN11 PIN20 DP1 7.6 (0.3") DIG.1 DIG.2 DP5 DIG.3 DIG.4 DP2 DP3 DP8 DP9 DP4 DP6 DP7 7.0 (0.276") 13.2 (0.52") 10.0 (0.394") DP10 PIN1 PIN10 A F G LFD3A5/63-XX/RP75-PF LIGITEK E D B C DP 7.5±0.5 ψ0.45 TYP 2.50X10=25.0 (0.98") PIN NO.1 Note : 1.All dimension are in millimeters and (lnch) tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/8 PART NO. LFD3A5/63-XX/RP75-PF Internal Circuit Diagram LFD3A53-XX/RP75-PF 21 17 19 20 3 11 18 22 7 12 A DIG.1 B C 2 D E F G A DIG.2 B C 5 D E F G DP5 6 DP6 LFD3A63-XX/RP75-PF 21 17 19 20 3 11 18 22 7 12 A DIG.3 B C 8 D E F G 9 DP7 16 DP4 1,4,14,23,24 NOPIN 13 A DIG.2 B C 5 D E F G DP5 6 DP6 A DIG.3 B C 8 D E F G 9 A DIG.4 B C 10 D E F G 15 A DIG.1 B C 2 D E F G DP7 16 A DIG.4 B C 10 D E F G 15 DP4 1,4,14,23,24 NOPIN 13 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/8 PART NO. LFD3A5/63-XX/RP75-PF Electrical Connection PIN NO. LFD3A53-XX/RP75-PF PIN NO. LFD3A63-XX/RP75-PF 1 NO PIN 1 NO PIN 2 Common Cathode Dig.1 2 Common Anode Dig.1 3 Anode D 3 Cathode D 4 NO PIN 4 NO PIN 5 Commom Cathode Dig.2 5 Commom Anode Dig2 6 Cathode DP5,DP6 6 Anode DP5 7 Anode DP5 7 Cathode DP5 8 Common Cathode Dig.3 8 Common Anode Dig.3 9 Anode DP7 9 Cathode DP7 10 Common Cathode Dig.4 10 Common Anode Dig.4 11 Anode (Dig.2,Dig.3,Dig.4) E 11 Cathode (Dig.2,Dig.3,Dig.4) E 12 Anode DP6 12 Cathode DP6 13 Cathode DP4 13 Anode DP4 14 NO PIN 14 NO PIN 15 Anode DP4 15 Cathode DP4 16 Cathode DP7 16 Cathode DP7 17 Anode A 17 Cathode A 18 Anode F 18 Cathode F 19 Anode B 19 Cathode B 20 Anode C 20 Cathode C 21 Anode Dig.1 E 21 Cathode Dig.1 E 22 Anode G 22 Cathode G 23 NO PIN 23 NO PIN 24 NO PIN 24 NO PIN LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/8 PART NO. LFD3A5/63-XX/RP75-PF Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT Y Forward Current Per Chip IF 20 mA Peak Forward Current Per Chip (Duty 1/10,0.1ms Pulse Width) IFP 80 mA Power Dissipation Per Chip PD 60 mW Ir 10 μA Operating Temperature Topr -25 ~ +85 ℃ Storage Temperature Tstg -25 ~ +85 ℃ Reverse Current Per Any Chip Part Selection And Application Information(Ratings at 25℃) common cathode Material Emitted or anode CHIP PART NO △λ Vf(v) (nm) Min. Iv(mcd) Typ. Max. Min. IV-M Typ. Common Cathode LFD3A53-XX-RP75-PF GaAsP/GaP LFD3A63-XX-RP75-PF Electrical λP (nm) 585 Yellow 35 1.7 2.1 Common Anode Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 2.6 0.8 1.35 2:1 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LFD3A5/63-XX/RP75-PF Page 5/8 Test Condition For Each Parameter Symbol Unit Test Condition Forward Voltage Per Chip Vf volt If=20mA Luminous Intensity Per Chip Iv mcd If=10mA Peak Wavelength λP nm If=20mA △λ nm If=20mA Ir μA Vr=5V Parameter Spectral Line Half-Width Reverse Current Any Chip Luminous Intensity Matching Ratio IV-M LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LFD3A5/63-XX/RP75-PF Page6/8 Typical Electro-Optical Characteristics Curve Y CHIP Fig.2 Relative Intensity vs. Forward Current Fig.1 Forward current vs. Forward Voltage 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 2.0 1.0 3.0 4.0 5.0 1.0 10 Fig.3 Forward Voltage vs. Temperature Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25℃ 1.2 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 100 Relative Intensity@20mA Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0.0 550 600 650 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 Ambient Temperature( ℃) Ambient Temperature( ℃) 500 1000 Forward Current(mA) Forward Voltage(V) -40 100 700 80 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LFD3A5/63-XX/RP75-PF Page 7/8 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One time only) Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260°C 2.Wave Soldering Profile Dip Soldering Preheat: 120° C Max Preheat time: 60seconds Max Ramp-up 2° C/sec(max) Ramp-Down:-5° C/sec(max) Solder Bath:260° C Max Dipping Time:3 seconds Max Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260°C Temp(°C) 260° C3sec Max 260° 5° /sec max 120° 25° 0° 0 2° /sec max Preheat 50 100 60 Seconds Max Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 150 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LFD3A5/63-XX/RP75-PF Page 8/8 Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hours. Thermal Shock Test 1.Ta=105 ℃±5 ℃&-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11