LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only ROUND TYPE LED LAMPS Pb Lead-Free Parts LI2040-PF DATA SHEET DOC. NO : QW0905-LI2040-PF REV. : A DATE : 25 - Apr . - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/5 PART NO. LI2040-PF Package Dimensions 3.0 4.0 4.2 5.2 1.5MAX 25.0MIN □0.5 TYP 1.0MIN 2.54TYP + Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation 0° -30° 30° -60° 100% 75% 50% 60° 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/5 PART NO. LI2040-PF Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT I Forward Current IF 30 mA Peak Forward Current Duty 1/10@10KHz IFP 120 mA Power Dissipation PD 100 mW Reverse Current @5V Ir 10 μA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature Tsol Max 260 ℃ for 5 sec Max (2mm from body) Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO COLOR MATERIAL Emitted LI2040-PF Peak Spectral Forward voltage wave halfwidth @20mA(V) length △λ nm λPnm Lens GaAsP/GaP Orange Red Diffused 635 45 Luminous intensity @10mA(mcd) Min. Max. Min. Typ. 2.6 20 1.7 Note : 1.The forward voltage data did not including ± 0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 12 Viewing angle 2 θ 1/2 (deg) 36 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page4/5 PART NO. LI2040-PF Typical Electro-Optical Characteristics Curve E CHIP Fig.2 Relative Intensity vs. Forward Current Fig.1 Forward current vs. Forward Voltage 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 2.0 1.0 3.0 4.0 5.0 1.0 10 Fig.3 Forward Voltage vs. Temperature Fig.4 Relative Intensity vs. Temperature 1.2 3.0 Relative Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25℃ 1000 Forward Current(mA) Forward Voltage(V) 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0.0 550 600 650 700 Wavelength (nm) 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 Ambient Temperature(℃) Ambient Temperature( ℃) Relative Intensity@20mA 100 750 Fig.6 Directivity Radiation 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LI2040-PF Page 4/5 Wave soldering Profile Temp(°C) 245° C 5sec Max 245° 5° /sec max 120° 25° 3° /sec max Soldering Soldering Iron:30W Max Temperature 300 ° C Max Soldering Time:3 Seconds Max Distance:2mm Min(From solder joint to case) Dip Soldering Preheat: 120 ° C Max Time(sec) Preheat time: 120 seconds Max Ramp-up 3° C/sec(max) Ramp-Down:-5 ° C/sec(max) Solder Bath:245 ° C Max Dipping Time:5 seconds Max Distance:2mm Min(From solder joint to case) Preheat 120 Seconds Max Wave Soldering Profile (Pb Free) Temp(°C) 265° C 5sec Max 265° 5° /sec max 140° 25° Soldering Soldering Iron:30W Max Temperature:350 ° CMax Soldering Time:3seconds Max Distance:2mm Min(From solder joint to case) 3° /sec max Preheat 120 Seconds Max Dip Soldering Preheat: 140° C Max Preheat time: 120seconds Max Time(sec) Ramp-up 3° C/sec(max) Ramp-Down:-5 ° C/sec(max) Solder Bath:265 ° C Max Dipping Time:5 seconds Max Distance:2mm Min(From solder joint to case) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LI2040-PF Page 5/5 Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hous. 1.Ta=105 ℃±5℃&-40 ℃±5℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5 ℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5 ℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11