LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only FEATURES * AC input response * Current transfer ratio ( CTR : MIN. 20% at IF = ±1mA, VCE = 5V ) * Isolation voltage between input and output LTV-354T-TP1 ( Viso = 3,750Vrms ) * Employs double transfer mold technology * Subminiature type * Mini-flat package : 2.0 profile : LTV-354T-TP1 * Packing volume : 3000 pcs / Reel * UL approved ( No. E113898 ) * CUL approved ( No. E113898 , 01SC19287 ) * CSA approved ( No. 1243207 ) * FIMKO approved ( No. FI-16420 ) * NEMKO approved ( No. P01100403 ) * DEMKO approved ( No. 310475-01 ) * SEMKO approved ( No. 0109173 / 01-08 ) * VDE approved ( No. 094722 ) * RoHS compliance APPLICATIONS * Hybrid substrates that require high density mounting. * Programmable controllers Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only OUTLINE DIMENSIONS LTV-354T-TP1 : *1. 2-digit date code. *2. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *3. Rank shall be or shall not be marked. Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TAPING DIMENSIONS Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 12 ± 0.3 ( .47 ) 4 ± 0.1 ( .15 ) 5.5 ± 0.1 ( .217 ) 2 ± 0.1 ( .079 ) 8 ± 0.1 ( .315 ) Page : 3 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF ±50 mA Power Dissipation P 70 mW Collector - Emitter Voltage VCEO 35 V Emitter - Collector Voltage VECO 6 V Collector Current IC 50 mA Collector Power Dissipation PC 150 mW Ptot 170 mW Viso 3,750 Vrms Operating Temperature Topr -55 ~ +100 °C Storage Temperature Tstg -55 ~ +150 °C Tsol 260 °C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 4 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage VF — 1.2 1.4 V IF=±20mA Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 100 nA VCE=20V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 35 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 6 — — V IE=10µA IF=0 IC 0.2 — 4 mA *1 Current Transfer Ratio CTR 20 — 400 % Collector-Emitter Saturation Voltage VCE(sat) — 0.1 0.2 V IF=±20mA IC=1mA Isolation Resistance Riso — Ω DC500V 40 ~ 60% R.H. Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz Response Time (Rise) tr — 4 18 µs Response Time (Fall) tf — 3 18 µs INPUT OUTPUT Collector Current TRANSFER CHARACTERISTICS *1 CTR = 5×1010 1×1011 IF=±1mA VCE=5V VCE=2V, IC=2mA RL=100Ω IC × 100% IF Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 5 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. RANK MARK CTR ( % ) A 50 ~ 150 A or No mark 20 ~ 400 LTV-354T IF = ±1 mA CONDITIONS VCE = 5 V Ta = 25 °C Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 6 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) Forward current I F (mA) 60 50 40 30 20 10 0 -55 0 25 50 75 100 125 200 150 100 50 0 -55 0 3 2 1 Ta= 75 C 50 C o o 200 25 C 0C -25 C o 100 o 50 20 10 5 2 1 0 2.5 5.0 7.5 10.0 12.5 15.0 0 0.5 Fig.5 Current Transfer Ratio vs. Forward Current 140 10 15 20 50 o Ta= 25 C o Collector current Ic (mA) 100 80 60 40 20 0 0.1 0.2 0.5 1 5 10 20 Forward current I F (mA) Part No. : LTV-354T-TP1 40 I F= 30mA Pc(MAX.) 30 20mA 20 10mA 10 5mA 1mA 0 2 30 Fig.6 Collector Current vs. Collector-emitter Voltage VCE= 5V Ta= 25 C 120 25 Forward voltage VF (V) Forward current I F (mA) Current transfer ratio CTR (%) 125 o 0 BNS-OD-C131/A4 100 500 O Ta= 25 C Forward current I F (mA) Collector-emitter saturation voltage VCE(sat) (V) 4 75 Fig.4 Forward Current vs. Forward Voltage 6 5 50 Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current Ic= 0.5mA 1mA 3mA 5mA 7mA 25 o o Ambient temperature Ta ( C) 50 100 0 1 2 3 4 5 6 7 8 9 10 Collecotr-emitter voltage VCE (V) Page : 7 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only CHARACTERISTICS CURVES Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature Relative current transfer ratio (%) 150 I F= 1mA, VCE= 5V 100 50 Collector-emitter saturation voltage VCE(sat) (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 0.10 I F= 20mA I C= 1mA 0.08 0.06 0.04 0.02 0 0 20 40 60 80 100 20 o Collector Dark Current ICEO (nA) 80 100 Fig.10 Response Time vs. Load Resistance 100 VCE= 20V 50 Response time ( s) 1000 100 10 20 VCE= 2V Ic= 2mA o Ta= 25 C tr tf 10 5 td 2 ts 1 0.5 0.2 1 0.1 20 40 60 80 100 0.1 0.2 0.5 1 o Ambient Temperature Ta ( C) 2 5 10 Load resistance RL (k ) Fig.11 Frequency Response Voltage gain Av (dB) 60 Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. vs. Ambient Temperature 10000 40 o Ambient temperature Ta ( C) Test Circuit for Response Time V = 2V Ic= 2mA o Ta= 25 C 0 Vcc Input RD RL Input Output Output 10% 90% td RL= 1k 1k ts tr 100 -10 tf Test Circuit for Frequency Response Vcc RD -20 0.2 0.5 1 2 5 10 100 RL Output 1000 Frequency f (kHz) Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 8 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TEMPERATURE PROFILE OF SOLDERING REFLOW (1) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 9 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TEMPERATURE PROFILE OF SOLDERING REFLOW (2) When using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of above (1) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-354T-TP1 BNS-OD-C131/A4 Page : 10 of 10