LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only FEATURES 1. This specification shall be applied to photocoupler. Model No. LTV-816 as an option. 2. Applicable Models (Business dealing name) * Dual-in-line package : LTV816-V : 1-channel type / LTV826-V : 2-channel type / LTV846-V : 4-channel type * Wide lead spacing package : LTV816M-V : 1-channel type / LTV826M-V : 2-channel type / LTV846M-V : 4-channel type * Surface mounting package : LTV816S-V : 1-channel type / LTV826S-V : 2-channel type / LTV846S-V : 4-channel type * Tape and reel packaging : LTV816STA1-V, LTV826STA1-V 3. The relevant models are the models Approved by VDE according to DIN VDE 0884:1992-06 Approved Model No.: LTV-816 / LTV-826 / LTV-846 / LTV-816M / LTV-826M / LTV-846M / LTV-816S / LTV-826S / LTV-846S VDE approved No.: 094722 (According to the specification DIN VDE 0884:1992-06) * Operating isolation voltage VIORM : 850V (Peak) * Transient voltage VTR : 6000V (Peak) * Pollution : 2 (According to VDE 0110-1 : 1997-04) * Clearances distance (Between input and output) : 7.0mm (MIN.) * Creepage distance (Between input and output) : 7.0mm (MIN.) * Isolation thickness between input and output : 0.4mm (MIN.) * Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled. * Indication of VDE 0884 approval prints "4" for 4-pin and " package. Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 " for 8 & 16 pin on sleeve Page : 1 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV816-V : LTV826-V : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 2 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV846-V : LTV816M-V : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 3 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV826M-V : LTV846M-V : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 4 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV816S-V : LTV826S-V : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 5 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV846S-V : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 6 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS LTV816STA1-V : LTV826STA1-V : Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Page : 7 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW Collector - Emitter Voltage VCEO 80 V Emitter - Collector Voltage VECO 6 V Collector Current IC 50 mA Collector Power Dissipation PC 150 mW Ptot 200 mW Viso 5,000 Vrms Operating Temperature Topr -30 ~ +100 °C Storage Temperature Tstg -55 ~ +125 °C Tsol 260 °C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 8 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER INPUT OUTPUT VF — 1.2 1.4 V IF=20mA Reverse Current IR — — 10 µA VR=4V Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 100 nA VCE=20V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 80 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 6 — — V IE=10µA IF=0 IC 2.5 — 30 mA CTR 50 — 600 % Collector-Emitter Saturation Voltage VCE(sat) — 0.1 0.2 V IF=20mA IC=1mA Isolation Resistance Riso — Ω DC500V 40 ~ 60% R.H. Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz Cut-Off Frequency fc — 80 — kHz VCE=5V, IC=2mA RL=100Ω, -3dB Response Time (Rise) tr — 4 18 µs Response Time (Fall) tf — 3 18 µs * Current Transfer Ratio * CTR = CONDITIONS Forward Voltage Collector Current TRANSFER CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNIT 5×1010 1×1011 IF=5mA VCE=5V VCE=2V, IC=2mA RL=100Ω IC × 100% IF Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 9 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. RANK MARK CTR ( % ) L 50 ~ 100 A 80 ~ 160 B 130 ~ 260 C 200 ~ 400 D 300 ~ 600 L or A or B or C or D 50 ~ 600 B 130 ~ 260 B or C or BC 130 ~ 400 C 200 ~ 400 C or D or CD 200 ~ 600 B、BC、C、CD or No mark 50 ~ 600 LTV816-V LTV826-V LTV846-V IF = 5 mA CONDITIONS VCE = 5 V Ta = 25 °C Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 10 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ISOLATION SPECIFICATION ACCORDING TO VDE 0884 Parameter Symbol Conditions Rating Unit 30/100/21 - 2 - 850 VPEAK tp=60s, qc<5pC 1275 VPEAK tp=1s, qc<5pC 1594 VPEAK tINI = 10s 6000 VPEAK Class of environmental test - DIN IEC68 Pollution - DIN VDE0110 Maximum Operating Isolation Voltage Partial Discharge Diagram 1 Test Voltage (Between Input and Diagram 2 Output) Maximum Over-voltage VIORM - Vpr VINITIAL Remark Refer to the Diagram 1, 2 Safety Maximum Ratings o 1) Case Temperature Tsi IF = 0, Pc = 0 130 2) Input Current Isi Pc=0 55 mA 3) Electric Power (Output or Total Power Issipation) Psi - 160 mW Isolation Resistance (Test Voltage Between Input and Output : DC500V) RISO Ta=Tsi MIN.109 Ta=Topr(MAX.) MIN.1011 Ta=25 oC MIN.1012 C Refer to the Figure 1, 3 Ω Precautions in performing isolation test * Partial discharge test methods shall be the ones according to the specifications of VDE 0884:1992-06 * Please don't carry out isolation test (Viso) over VINITIAL ,This product deteriorates isolation characteristics by partial discharge due to applying high voltage (ex. VINITIAL ). And there is possibility that this product occurs partial discharge in operating isolation voltage (VIORM) Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 11 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only PARTIAL DISCHARGE TEST METHOD Method (A) for type testing and random testing. V VINTIAL Vpr VIORM tp tb t3 t1 tini t2 t4 t1, t2 = 1 to 10s t3, t4 = 1s tp (Partial Discharge Measuring Time)= 60s tb = 62s tini = 10s t Method (B) for routine testing. V Vpr VIORM t3 tp tb t4 t3, t4 = 0.1s tp (Partial Discharge Measuring Time)= 1s tb = 1.2s t The partial discharge level shall not exceed 5 pC during the partial discharge measuring time interval tp under the test conditions shown above. Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 12 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forword Current vs. Ambient Temperatute Fig.2 Collector Power Dissiption vs. Ambient Temperature Collector Power dissipation Pc (mW) 60 Forward current IF (mA) 50 40 30 20 10 0 -30 0 25 50 75 100 125 200 150 100 50 0 -30 o 7mA 2 Ta= 75 C 50 C o 200 o 25 C 0C -25 C o 100 o 50 20 10 5 2 1 0 2 4 6 8 10 12 14 16 18 20 0 0.5 1.0 1.5 2.0 2.5 3.0 Forward voltage VF (V) Forward current IF (mA) Fig.5 Current Transfer Ratio vs. Forward Current Fig.6 Collector Current vs. Collector-emitter Voltage 200 50 VCE= 5V Ta= 25 C 180 o o 160 Collector current Ic (mA) Current transfer ratio CTR (%) 125 1 0 140 120 100 80 60 40 40 25mA 30 20mA 2 5 10 20 50 Forward current IF(mA) Part No. : LTV816 / 826 / 846 (M, S, STA1)-V Pc(MAX.) 15mA 20 10mA 10 5mA 0 1 Ta= 25 C IF = 30mA 20 0 BNS-OD-C131/A4 100 o Forward current IF (mA) Collecotr-emitter saturation voltage VCE (sat) (V) 5mA 3 75 500 O Ta= 25 C 1mA 3mA 4 50 Fig.4 Forward Current vs. Forward Voltage 6 Ic= 0.5mA 25 Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current 5 0 o Ambient temperature Ta ( C) 0 1 2 3 4 5 6 7 8 9 Collector-emitter voltage VCE (V) Page : 13 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature Collector-emitter saturation voltage VCE (sat) (V) Relative current transfer ratio (%) 150 Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature I F = 5mA VCE= 5V 100 50 0 -30 0 25 50 75 0.16 I F= 20mA Ic= 1mA 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 -25 100 Ambient temperature Ta ( C) 50 75 100 Fig.10 Response Time vs. Load Resistance -5 500 VCE= 20V -6 10 Response time ( s) Collector dark current I CEO (A) 25 Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Ambient Temperature 10 0 o o -7 10 -8 10 -9 10 200 100 o 50 tr 20 10 td tf 5 ts 2 1 -10 10 VCE = 2V Ic= 2mA Ta= 25 C 0.5 -11 10 -25 0 25 50 75 0.2 0.05 100 o Ambient temperature Ta ( C) 0.1 0.2 Fig.11 Frequency Response 1 2 5 10 Test Circuit for Response Time Vcc Voltage gain Av (dB) 0.5 Load resistance RL (k ) VCE = 2V Ic= 2mA Ta= 25 C o 0 Input RD RL Input Output Output 10% 90% ts td tr 10 tf RL= 10k 1k 100 Test Circuit for Frequency Response Vcc 20 0.5 1 RD 2 5 10 20 50 100 RL Output 500 Frequency f (kHz) Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 14 of 15 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm 4 PIN 8 PIN 16 PIN Part No. : LTV816 / 826 / 846 (M, S, STA1)-V BNS-OD-C131/A4 Page : 15 of 15