LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only FEATURES * Isolation voltage between input and output Viso : 5,000Vrms * 6pin DIP photocoupler, triac driver output * High repetitive peak off-state voltage VDRM : Min. 400V * High critical rate of rise of off-state voltage ( dV/dt : MIN. 100V / µs ) * Dual-in-line package : MOC3022-A * Wide lead spacing package : MOC3022-AM * Surface mounting package : MOC3022-AS * Tape and reel packaging : MOC3022-AS-TA1 * UL approved ( No. E113898 ) * FIMKO approved ( No. 209049 ) * NEMKO approved ( No. P99102464 ) * DEMKO approved ( No. 99-04182 ) * SEMKO approved ( No. 9943380 / 01-20 ) * CSA approve in progress * VDE approve in progress FEATURES * Motor Controls * Solid state relays * For triggering high power thyristor and triac * Household use equipment Part No. : MOC3022-A BNS-OD-C131/A4 Page : 1 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS Dual-in-line package : Wide lead spacing package: *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand). Model No.: MOC3022-A Part No. : MOC3022-A BNS-OD-C131/A4 Page : 2 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS Surface mounting package : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand). Model No.: MOC3022-A Part No. : MOC3022-A BNS-OD-C131/A4 Page : 3 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS Tape and reel package : MOC3020S-TA1, MOC3021S-TA1, MOC3022S-TA1, MOC3023S-TA1 Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : MOC3022-A BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Page : 4 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation PD 70 mW Off-State Output Terminal Voltage VDRM 400 V Peak Repetitive Surge Current ( PW=1ms, 120pps ) VTSM 1 A PC 300 mW Ptot 330 mW Viso 5,000 Vrms Ambient Operating Temperature Range TA -40 ~ +100 °C Storage Temperature Range Tstg -55 ~ +150 °C TL 260 °C INPUT OUTPUT Collector Power Dissipation Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : MOC3022-A BNS-OD-C131/A4 Page : 5 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage VF — 1.2 1.4 V IF=20mA Reverse Current IR — — 10 µA VR=6V *1 Peak Blocking Current, Either Direction IDRM — 10 100 nA VDRM = 400V Peak On-State Voltage, Either Direction VTM — 1.7 3 V ITM=100 mA Peak Critical rate of Rise of Off-State Voltage dv/dt 100 — — V/µs IFT — - 10 mA Holding Current, Either Direction IH 100 — — µA Turn-On time ton — 8 20 µs INPUT OUTPUT *2 Led Trigger Current, Current *3 Required to Latch Output, Either Direction COUPLED Main Terminal Voltage = 3V VD=9V, IF=20mA RL=100Ω *1 Test voltage must be applied within dv/dt rating. *2 This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only. *3 All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max IFT 30 mA and absolute max IF (50mA) Part No. : MOC3022-A BNS-OD-C131/A4 Page : 6 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 On-state Current vs. Ambient Temperature 50 ITM , on-state current (A) Forward current I F (mA) 60 40 30 20 10 0 -40 -20 0 0.10 0.05 0 -40 -20 20 40 60 80 100 120 o 20 40 60 80 100 120 Ambient temperature Ta ( C) Fig.3 Minimum Trigger Current vs. Ambient Temperature Fig.4 Forward Current vs. Forward Voltage 10 100 VP= 6V RL= 100 8 Forward current IF (mA) Minimum trigger current IFT (mA) 0 o Ambient temperature Ta ( C) 6 4 2 0 o o 60 C 40 C 20 C 80 C 100 C o o o 10 1 20 40 60 80 0.4 100 o 0.8 1.2 Fig.5 On-state Voltage vs. Ambient Temperature Fig.6 Holding Current vs. Ambient Temperature 3.0 1 2.6 VP= 6V Holding current IH (mA) On-state voltage VT (V) IT= 100mA 2.2 1.8 1.4 1.0 0.1 0.01 20 40 60 100 80 o Ambient temperature Ta ( C) Part No. : MOC3022-A BNS-OD-C131/A4 2.0 1.6 Forward voltage VF (V) Ambient temperature ( C) 20 40 60 80 100 o Ambient Temperature Ta ( C) Page : 7 of 8 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.7 Turn-on Time vs. Forward Current Fig.8 Repetitive Peak Off-state Current vs. Temperature 20 1000 Repetitive Peak Off-state Current Idrm (nA) Turn-on time Ton ( s) VP= 6V RL= 100 18 16 14 12 100 10 1 10 10 20 30 50 40 20 40 60 100 80 O Forward current I F (mA) Ambient temperature Ta ( C) Basic Operation Circuit Medium/High Power Triac Drive Circuit Fig.9 On-state Current vs. On-state Voltage On-state current IT (mA) 100 80 + Vcc 60 1 4 2 5 3 6 VIN 40 Load AC100V 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 On-state voltage VT (V) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : MOC3022-A BNS-OD-C131/A4 Page : 8 of 8