LESHAN RADIO COMPANY, LTD. LGRV05-4LT1G STEERING DIODE/TVS ARRAY COMBO MECHANICAL CHARACTERISTICS z z LGRV05 - 4LT1G Molded JEDEC TSOP-6 Weight 16 milligrams (Approximate) 6 5 Features z 300 Watts Peak Pulse Power per Line (tp=8/20μs) z z z z Low Clamping Voltage PROTECTS FOUR (4) LINES ULTRA LOW CAPACITANCE :3.5 Pf Typical RoHS Complianton Lead Free Versions 4 1 2 3 TSOP-6 APPLICATIONS z z z z z z z Ethernet – 10/100/1000 Base T Cellular Phones Handheld & Portable Electronics Video/Graphics Card USB 2.0 Interface DVI Interface We declare that the material of product compliance with RoHS requirements. ORDERING INFORMATION IEC COMPATIBILITY(EN61000-4) z z z 61000-4-2 (ESD): Air – 15kV,Contact – 8kV 61000-4-4 (ESD): 40A – 5/50ns 61000-4-5 (Surge): 24A,8/20μs-Level 2 (Line-Gnd) & Level 3 (Line –Line) Device Package LGRV05 - 4LT1G TSOP-6 Shipping 3000/Tape & Reel DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25℃ Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 300 Watts TJ -55℃ to 150℃ ℃ TSTG -55℃ to 150℃ ℃ Forward Surge Rating (1/20 seconds @ 25℃, IF=10mA) VF 1.5 Volts Peak Pulse Current IPP 12 Amps Peak Pulse Power (tp=8/20μs)See Figure 1 Operating Temperature Storage Temperature (tp= 8/20μs) 1/4 LESHAN RADIO COMPANY, LTD. LGRV05 - 4LT1G ELECTRICAL CHARACTERISTICS PER LINE @ 25℃ Unless Otherwise Specified PART NUMBER RATED STANDOF F VOLTAGE MINIMUM BREAKDO WN VOLTAGE (See Note1) (See Note1) MAXIMUM CLAMPIN G VOLTAGE (See Fig.2) MAXIMUM CLAMPIN G VOLTAGE MAXIMUM LEAKAGE CURRENT TYPICAL CAPACIT ANCE (See Note1) (See Note1) (See Note1) (See Note 1) @1mA V(BR) VOLTS @IP=1A VC VOLTS @IP=5A VC VOLTS @ VWM ID μA @0V,1MHz VWM VOLTS 5.0 6.0 12.0 15.0 5 3.5 LGRV05-4LT1G CJ(SD) pF Note 1: From I/O Pin to Ground. FIGURE 1 PEAK PULSE POWER VS PULSE TIME Peak Pulse Power - PPk (kW) 10 1 0.1 0.01 0.1 1 10 100 1000 Pulse Duration - tp (µs) 2/4 LESHAN RADIO COMPANY, LTD. LGRV05 - 4LT1G FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR LGRV05-4LT1G 3/4 LESHAN RADIO COMPANY, LTD. LGRV05 - 4LT1G TSOP−6 SOT23−6, SC59−6 CASE 318G−02 ISSUE S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D " HE E b e q c A !!(*!!!+ A1 SOLDERING FOOTPRINT* L DIM A A1 b c D E e L HE q MIN 0.90 0.01 0.25 0.10 2.90 1.30 0.85 0.20 2.50 0° MILLIMETERS NOM MAX 1.00 1.10 0.06 0.10 0.38 0.50 0.18 0.26 3.00 3.10 1.50 1.70 0.95 1.05 0.40 0.60 2.75 3.00 10° − MIN 0.035 0.001 0.010 0.004 0.114 0.051 0.034 0.008 0.099 0° INCHES NOM 0.039 0.002 0.014 0.007 0.118 0.059 0.037 0.016 0.108 − MAX 0.043 0.004 0.020 0.010 0.122 0.067 0.041 0.024 0.118 10° 4/4 LESHAN RADIO COMPANY, LTD. EMBOSSED TAPE AND REEL DATA FOR DISCRETES T Max Outside Dimension Measured at Edge 13.0mm ± 0.5mm 1.5mm Min (.512 ±.002’’) (.06’’) A 50mm Min (1.969’’) 20.2mm Min (.795’’) Full Radius G Inside Dimension Measured Near Hub Size A Max 8 mm 178.0mm (7.0’’) G 8.4mm+1.5mm, -0.0 (.33’’+.039’’, -0.00) T Max 10.9mm (.43’’) Reel Dimensions Metric Dimensions Govern –– English are in parentheses for reference only Storage Conditions Temperature: 5 to 40 Deg.C (20 to 30 Deg. C is preferred) Humidity: 30 to 80 RH (40 to 60 is preferred ) Recommended Period: One year after manufacturing (This recommended period is for the soldering condition only. The characteristics and reliabilities of the products are not restricted to this limitation) LESHAN RADIO COMPANY, LTD. Shipment Specification CPN LABEL LABEL LABEL Dim(Unit:mm) 195mm*195mm*150mm 10 Reel 10Reel/Inner Box 30KPCS/Inner Box 3000PCS/Reel 40KPCS/Inner Box (SOT-723,SOD-723,SOD-923) 4000PCS/Reel (SOT-723,SOD-723,SOD-923) 80KPCS/Inner Box (SOT-723,SOD-723,SOD-923) 8000PCS/Reel (SOT-723,SOD-723,SOD-923) Dim(Unit:mm) LABEL 460mm*400mm*420mm MARK 乐山无线电股份有限公司 Leshan Radio Company,Ltd. 12 Inner Box/Carton 360KPCS/Carton 960KPCS/Carton (SOT-723,SOD-723,SOD-923)