6”Dia. extruded aluminum poles L U M I N IS POLES PEX Specification All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Cast aluminum wiring access cover. - Set of 4 galvanized anchor bolts with 8 nuts and washers. - 6061 T6 alloy 6” O.D. Extruded aluminum pole with a fine surface of linear grooves to increase paint adherence and strength , with 4” O.D. x 125” thick aluminum center pole. - One-piece 1/2” thick cast aluminum base plate with pole collar adaptor and 4 reinforcing gussets. - Two piece cast aluminum base cover. - All stainless steel hardware. PEX : 6” O.D. Extruded aluminum pole. (E.P.A) PEX10 PEX12 10 FT 12 FT PEX14 14 FT 5.8 4.4 3.4 2.8 2.3 4.4 2.6 3.2 1.8 2.4 1.3 1.9 1.6 1.0 0.8 Please consult factory for EPA on selected luminaire. 4” O.D 6” 9” Dia. Bolt circle. 4” 11” Dia. base plate Ft. Street side 18” 4” Hand hole wiring access cover 12” Mounting Base plate is provided with a 3 3/4” dia. opening for power entry . Galvanized anchor bolts : Set of 3/4-10 x 18” lg. anchor bolts. For options details and specifications, please refer to page 144 Model# Finish PEX. : 6” O.D. Extruded aluminum pole Ft. Ft. PEX10 PEX12 PEX14 10 12 14 PEX16 PEX18 PEX20 16 18 20 Note: Pole is factory extended to accommodate selected luminaire attachment. Note Ft. Please refer to pages 145 & 146 for poles/luminaires and attachment reference chart (Refer to color chart) Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color Options BNF: BNF80: FS: PH1: PH2: GFI : Accessories One banner arm factory preset in position. Set of 2 banner arms factory preset at 180º position. Electrical Fuse 120/277V photo cell 347V photo cell G.F.I . Ground fault interruption receptacle. Note: FS-PH1-PH2 Options are installed with pole when specified with a Luminaire. luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 142 Web: www.luminis.com Sept. 2006 Rev. Feb.2007 L U M I N IS Options and accessories Important: E.P.A. banner rating (By others) Must be compatible with selected pole and luminaire E.P.A Side view 4 1/2” 9” 24” POLES BNR - BNR2 Single or double adjustable and removable banner arm E.P.A: 0.19 (Per arm) 5” 33” 4” O.D. Cast aluminum 2 piece pole clamp assembly. Fits with a 4” dia. O.D. pole. On site installation.: Banner arm may rotate 360º around pole and and adjusted to desired height. Banner arm may be removed for storage and reinstalled as desired. Add. suffix to selected catalog pole number. BNR BNR2 BNF (Single banner arm) 6” 2” 1 1/2” Dia. Clamp may rotate and slide along pole as desired Important: E.P.A. banner rating (By others) Must be compatible with selected pole Banner arm tube sleeve is factory and luminaire E.P.A Removable Post top 1 1/2” dia. aluminum tube Removable stopper disc BNF: Single BNF80: Double Pre-positionned banner arm. E.P.A: 0.17 (Per arm) prefixed to fit with a removable banner tube support. Banner arm tube may be removed for storage and reinstalled as desired. Add. suffix BNF or BNF80 to selected catalog pole number. 24” Street side BNF80 (2 banner arms at 180 deg.) Post top Side mount luminaire direction (Factory setting) 6” Unless otherwise specified, Banner arms are factory preset at 6” for post top. In line fuse Option: FS In line protection fuse, factory installed with the pole GFI receptacle Option: GFI Light photo sensor Option: PH1 -120V PH2 - 277 / 347V Photo electric sensor, factory installed with the pole or inside fixture when pole is not required. Add selected option suffix code to pole catalog number House side * BNF80 Side mount luminaire direction (Factory setting) Street side Banner House side * BNF * Note: BNF banner arm is factory installed on house side position. 180º away from Luminaire side mount installation, and 6” down from post top. For other positions, BNF80 banner arms are factory installed 90º away from Luminaire side mount installation, and 6” down from post top. For other positions, Please consult factory Please consult factory Duplex gasketed ground fault interrupter receptacle. luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 144 Web: www.luminis.com Sept. 2006 Rev. Feb.2007