L U M IN IS PELICAN Post top twin mount PL10P Specification All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) 1 2 Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. 3 4 - Multi faceted twin reflector assembly can tilt and slide along pole side, to maximize desired performance on field. A locking cast aluminum assembly is provided to secure adjusted position of reflectors. Multi faceted reflector panels are painted with a textured white coating applied on both faces. The white enamel textured finish over the reflective surface insures optimal lighting performance and brightness control. 5 6 7 8 - 9 10 82” Pulse rated porcelain socket. One-piece molded silicone gasket with memory retention. High power factor CWA ballast. All stainless steel hardware. All Moving and removable parts are sealed with a memory retention silicone gasket. 123456- Aluminum reflector sliding assembly. Cast aluminum tilting and locking assembly. Multi facet textured white aluminum reflector panels assembly. Cast aluminum curved reflector joiner arms. Tempered clear glass lens. Cast aluminum sealed removable glass frame, with perimeter memory retention embedded silicone gasket. 7 - Cat aluminum luminaire housing with heat dissipation fins. 8 - Specular aluminum reflector. 9 - Isolated and sealed aluminum ballast housing. 10 - 11 ga. galvanized pressure mounting plate. 24” 36” 15 3/4” 7” Photometry 15” 40” + 15 deg. - Up/down Please refer to page 79 for matching poles listing Certification Mounting / EPA Light source selection MH (ED17) M70 M100 M150 M175 PL10P 60 EPA: 5.5 Fits with a 4” or 5” dia. pole.. UL. Wet Location. Model# 90 * M250 (ED18) Mog. base HPS (ED17) H70 H100 H150 * H250 (ED18) Mog. base (Lamps by others) Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. 30 Voltage Finish 120 V Standard factory prewired (If no voltage is specified) For other voltages, please specify with catalog number. H.I.D. 208 V 240 V 277 V 347 V 480 V * Lamp operation requires M250 ANSI code M58 H250 ANSI code S50 (Refer to color chart) Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color Options OFF FS: PH1: PH2: QS: QRS: Mounting Bi-level luminaires position. To be specified. Electrical Fuse 120/277V photo cell 347V photo cell Quartz lamp socket for external emergency power. Quartz restrike standby relay. Luminaires may be altered for improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 73 Web: www.luminis.com Sept. 2006 Rev: Jan.2008 L U M IN I S PELICAN OPTIONAL MOUNTING AND ACCESSORIES Pole mount Wall mount 10 1/2” 36” 48” PL15P 15 3/4” 60” PLW series Mounting 28” 52” 3” PL15P 36” 4 5/8” PLW Wall mount PL10P 48” 3” 6 1/8” 4 5/8” 6 1/8 55” Power PLW -1” x 3” extruded aluminum twin short arm mounting adaptor designed for wall installation, with a set of two cast aluminum mounting plates. 4” Dia. vertical tube luminaire support. PL40P PL30P Compatible poles listing. * Note: 24” extension with PL30P attachment 48” extension with PL15P/PL10P attachment 66” extension with PL40P attachment OAL pole height 12-14 or 16ft. PEX pole style PXD pole style PCA pole style * Note 60” PAA pole style Mounting style Post top mounting 4”O.D. 5”O.D. 4”O.D. PAA414-PL1 PAA514-PL1 PCA14-PL1 PAA416-PL1 PAA516-PL1 PCA16-PL1 PAA418-PL1 PAA518-PL1 PCA18-PL1 PAA420-PL1 PAA520-PL1 PCA20-PL1 PAA414-PL2 PAA514-PL2 PCA14-PL2 PAA416-PL2 PAA516-PL2 PCA16-PL2 PAA418-PL2 PAA518-PL2 PCA18-PL2 PAA420-PL2 PAA520-PL2 PCA20-PL2 PAA416-PL4 PAA516-PL4 PCA16-PL2 PAA418-PL4 PAA518-PL4 PCA18-PL2 PAA420-PL4 PAA520-PL4 PCA20-PL2 PAA410-PL3 PAA510-PL3 PCA14-PL2 PAA412-PL3 PAA512-PL3 PCA16-PL2 PAA414-PL3 PAA514-PL3 PCA18-PL2 PAA416-PL3 PAA516-PL3 PCA20-PL2 PAA418-PL3 PAA518-PL3 PAA420-PL3 PAA520-PL3 For poles details and specification, please refer to pages 140 to 144 4”O.D. 4”O.D. PEX14-PL1 PEX16-PL1 PEX418-PL1 PEX420-PL1 PEX414-PL2 PEX416-PL2 PEX418-PL2 PEX420-PL2 PEX416-PL4 PEX418-PL4 PEX420-PL4 PXD14-PL1 PXD16-PL1 PXD18-PL1 PXD20-PL1 PXD14-PL2 PXD16-PL2 PXD18-PL2 PXD20-PL2 PXD10-PL3 PXD12-PL3 PXD14-PL3 PXD16-PL3 PXD18-PL3 PXD20-PL3 Pole height 14 ft 16 ft 18 ft 20 ft 14 ft 16 ft 18 ft 20 ft 16 ft 18 ft 20 ft 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 79 Web: www.luminis.com Sept. 2006 Rev. Feb.2007