FEATURES FILAMENT REPLACEMENT LEDs - Multi-LED Cluster 218 SERIES l Direct replacement for E26 (North American Standard) PACK QUANTITY = 1 PIECE l 20 LED Cluster l BA22 (UK) and E27 (Europe) versions also available l Optional polycarbonate lens SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE AC/DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP λp Topr Tstg HIGH INTENSITY 218-501-22-65 Red Water Clear 24 Vdc 75 11000 643 -40 ~ +95^ -40 ~ +100 Yes 218-521-22-65 Yellow Water Clear 24 Vdc 75 16000 591 -40 ~ +95^ -40 ~ +100 Yes 218-532-22-65 Green Water Clear 24 Vdc 75 23000 527 -40 ~ +95^ -40 ~ +100 Yes 218-930-22-65 Blue Water Clear 24 Vdc 75 7000 470 -40 ~ +95^ -40 ~ +100 Yes 218-997-22-65 Cool White Water Clear 24 Vdc 75 14000 *See below -40 ~ +95^ -40 ~ +100 Yes 218-501-75-65 Red Water Clear 110 Vac 22 11000 643 -40 ~ +95^ -40 ~ +100 Yes 218-521-75-65 Yellow Water Clear 110 Vac 22 16000 591 -40 ~ +95^ -40 ~ +100 Yes 218-532-75-65 Green Water Clear 110 Vac 22 23000 527 -40 ~ +95^ -40 ~ +100 Yes 218-930-75-65 Blue Water Clear 110 Vac 22 7000 470 -40 ~ +95^ -40 ~ +100 Yes 218-997-75-65 Cool White Water Clear 110 Vac 22 14000 *See below -40 ~ +95^ -40 ~ +100 Yes mA mcd nm 0 UNITS 997 *Typical emission colour cool white 0.296 0.283 0.330 0.330 y 0.276 0.305 0.360 0.318 x C C 0 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. - Refer to page 3. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 008/08 Issue 1 Page 1 of 3 218 Series Ø68.5 Ø22.1 97 Dimensions in mm (Typical) Not to scale TECHNICAL INFORMATION Lamp Base Style Series E26 Filament Base 218 Metric Equivalent (mm) 26 Maximum Power Dissipation (mW) 2500 DESIGN CONSIDERATIONS Single-Chip LEDs All devices feature water clear high intensity LEDs as standard. Product Evaluation Filament Replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability. As this product range is suitable for both new-build and retro-fit, (sometimes in very old systems), a wide range of illuminated lamp holders can be encountered. Due to subjectivity, evaluation of the LED Power Derating The forward voltage/current value of an LED is dependant upon the ambient temperature of the environment in which it is operated. Therefore, care must be taken to operate the LED at the correct voltage/current values, depending upon the ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, Marl should be contacted if the device is to be operated at a temperature significantly higher than 25°C. Marl accept no liability for any product that is operated higher than the stated voltage. Electro-static Discharge (ESD) Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. We recommend all users of LED based products follow the guidelines of BS 100015. Note: All luminous intensity figures refer to the unmodified discrete LED. How to Order: website: www.marl.co.uk • email: [email protected] • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 008/08 Issue 1 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 532, 930 501, 521 997 ALSO AVAILABLE Part numbers also available in the 218 Series: PART NO. COLOUR VOLTAGE DC PART NO. COLOUR VOLTAGE DC (Vdc) Vopr (Vdc) Vopr 218-501-22-59 Red 24Vdc 218-905-86-50 Orange 115Vac 218-501-22-65 Red 24Vdc 218-905-86-51 Orange 115Vac 218-501-23-65 Red 28Vdc 218-906-85-51 Yellow 110Vac 218-501-25-65 Red 110Vdc 218-906-86-50 Yellow 115Vac 218-501-75-65 Red 110Vac 218-906-86-51 Yellow 115Vac 218-501-77-64 Red 125Vac 218-906-86-52 Yellow 115Vac 218-501-86-65 Red 115Vac 218-906-86-85 Yellow 115Vac 218-521-22-65 Yellow 24Vdc 218-907-86-50 Green 115Vac 218-521-23-65 Yellow 28Vdc 218-907-86-51 Green 115Vac 218-521-25-65 Yellow 110Vdc 218-925-76-95 Yellow 230Vac 218-521-86-65 Yellow 115Vac 218-925-76-96 Yellow 230Vac 218-532-22-65 Green 24Vdc 218-925-86-50 Yellow 115Vac 218-532-23-65 Green 28Vdc 218-925-86-51 Yellow 115Vac 218-532-25-65 Green 110Vdc 218-925-86-52 Yellow 115Vac 218-532-75-65 Green 110Vac 218-930-22-65 Blue 24Vdc 218-532-85-65 Green 110Vac 218-930-23-65 Blue 28Vdc 218-751-86-66 Orange 115Vac 218-930-25-65 Blue 110Vdc 218-751-86-67 Orange 115Vac 218-940-86-50 IR 115Vac 218-751-86-72 Orange 115Vac 218-940-86-51 IR 115Vac 218-751-86-73 Orange 115Vac 218-940-86-52 IR 115Vac 218-752-86-72 Orange 115Vac 218-940-86-54 IR 115Vac 218-752-86-73 Orange 115Vac 218-960-22-76 IR 24Vdc 218-752-86-73 Orange 115Vac 218-997-22-65 White 24Vdc 218-904-85-58 Red 110Vac 218-997-23-65 White 28Vdc 218-904-85-63 Red 110Vac 218-997-25-65 White 110Vdc 218-904-86-50 Red 115Vac 218-997-75-65 White 110Vac 218-904-86-51 Red 115Vac 218-997-85-65 White 110Vac White 115Vac 218-904-86-52 Red 115Vac 218-997-86-65 218-904-86-85 Red 115Vac UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. UNITS How to Order: website: www.marl.co.uk • email: [email protected] • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 008/08 Issue 1 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3