Section 2; Fil.Rep.LEDs for pdf 19/1/00 1:08 pm Page 40 FILAMENT REPLACEMENT LEDs - MULTI-LED CLUSTER • Direct replacement for BA15d • Bi-polar • Moulded housing for ease of handling and installation • Side emitting product suitable for tower lights 234 SERIES MLQ = 25 Dimensions in mm (Typical) Scale 1:1 Colour indicator sealed within product denotes LED colour . LEDs Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to a single unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE LENGTH λp VIEWING ANGLE OPERATING TEMP Topr STORAGE TEMP Tstg Wide -40~+85 -40~+85 °C °C HIGH HIGHINTENSITY INTENSITY 234-501-22 Red 24 40 2750 660 234-521-22 Yellow 24 40 4500 590 234-532-22 Green 24 40 6000 525 234-930-22 Blue 24 40 2000 470 234-997-22 White 24 40 3000 • Vdc mA mcd nm UNITS Water Clear • = Typical emission colour: x=0.31, y=0.32. Colour temperature 8000K. Intensities (Iv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ISO 9001: 1994 APPROVED Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 • email: [email protected] • website: www.marl.co.uk • website: www.marl-leds.com