FM90C 90W AC-DC Single Output Desktop series Features : Universal AC input / Full range No load power consumption<0.75W@240VAC 3 pole AC inlet IEC320-C6 Class I power (with earth pin) Built-in active PFC function, PF>0.90 Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: UL / CUL / TUV / CB / FCC / CE 1 year warranty TUV SUD GeprUfte Sicherheit SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT FM90C12-P1M FM90C19-P1M FM90C24-P1M FDF0903-C FDF0903-A FDF0903-D 19V 24V Note.2 12V RATED CURRENT 6.60A 4.75A 3.75A CURRENT RANGE 0~ 6.60A 0 ~ 4.75A 0 ~ 3.75A RATED POWER 80W 90W 90W 150mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.3 150mVp-p VOLTAGE TOLERANCE Note.4 5.0% 3.0% 3.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% LOAD REGULATION Note.6 4.0% 2.0% 2.0% SETUP, RISE , HOLD UP TIME 300ms, 50ms , 10ms at full load INPUT VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF 0.90/230VAC EFFICIENCY (Typ.) 80% AC CURRENT 1.3A/100VAC INRUSH CURRENT (max.) 100A/240VAC LEAKAGE CURRENT (max.) 0.75mA / 240VAC OVERLOAD 110 ~ 150% rated output voltage Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 110 ~ 150% rated output voltage Protection type : Clamp by zener diode WORKING TEMP. 0 ~ + 50 WORKING HUMIDITY 20% ~ 90% RH non-condensing PROTECTION ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & EMC (Note. 7) OTHERS CONNECTOR NOTE 127 ~ 370VDC 80% 82% (Refer to output load derating curve) -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 3AXES 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:1.5KVAC; I/P-FG: 1.5KVAC I/P-O/P, I/P-FG: 100M ohms/500VDC/25 /70% RH ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B, FCC part 15 class B HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A DIMENSION PACKING PLUG 133*58*30mm (L*W*H) 406g; 32pcs/14.5Kg/CARTON Standard type P1M: 2.5 * 5.5 CABLE Standard type UL1185, 16awg*4fts for stock ; Other type available by customer requested 30K hrs min. MIL-HDBK-217F (25 ) * 11mm, tuning folk type center positive for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:FM90C-SPEC 2008-05-08 FM90C 90W AC-DC Single Output Desktop Mechanical Specification series Unit:mm UL 1185 16AWG 1200 50mm 30 5mm 11 0.5mm C"+" POWER LED ID 2.5 x OD 5.5 133 Plug Assignment 30 Standard plug: P1M (option) C5.0 58 46 P1M 73.5 Derating Curve P/N OUTPUT CENTER + Static Characteristics Ta=25 100 90 100 80 LOAD (%) LOAD (%) 70 50 0 10 20 30 40 50 Ta ( ) 60 70 (HORIZONTAL) 60 50 40 60 70 80 90 100 260 INPUT VOLTAGE File Name:FM90C-SPEC 2008-05-08