GS25U 20~25W AC-DC Single Output Wall-mounted type series Features : Universal AC input / Full range No load power consumption<0.5W Pass energy star(CEC) level regulation Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Full output 5~48V safety approval Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: UL / CUL / BSMI / CB / FCC Pass LPS for 9~48V output 2 years warranty SPECIFICATION ORDER NO. GS25U05-P1J GS25U07-P1J GS25U09-P1J GS25U12-P1J GS25U15-P1J GS25U18-P1J GS25U24-P1J GS25U28-P1J GS25U48-P1J SAFETY MODEL NO. DC VOLTAGE OUTPUT GS25U05 Note.2 5V GS25U07 GS25U09 GS25U12 GS25U15 GS25U18 GS25U24 GS25U28 7.5V 9V 12V 15V 18V 24V 28V 48V 0.52A RATED CURRENT 4.0A 2.93A 2.77A 2.08A 1.66A 1.38A 1.04A 0.89A CURRENT RANGE 0 ~ 4.0A 0 ~ 2.93A 0 ~ 2.77A 0 ~ 2.08A 0 ~ 1.66A 0 ~ 1.38A 0 ~ 1.04A 0 ~ 0.89A 0 ~ 0.52A RATED POWER (max.) 20W 22W 25W 25W 25W 25W 25W 25W 25W 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p 80mVp-p 80mVp-p 80mVp-p VOLTAGE TOLERANCE Note.4 RIPPLE & NOISE (max.) Note.3 50mVp-p 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE INPUT 74% AC CURRENT INRUSH CURRENT (max.) 0.7A / 100VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note. 7) CONNECTOR NOTE 500ms, 20ms, 15ms/115VAC at full load 47 ~ 63Hz EFFICIENCY (Typ.) LEAKAGE CURRENT(max.) OTHERS GS25U48 78% 79% 81% 82% 82% 83% 83% 84% 25A / 115VAC 0.25mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, BSMI, CNS14336 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMI CONDUCTION & RADIATION Compliance to FCC PART 15 / CISPR22 class B, CNS13438 class B 500Khrs min. MIL-HDBK-217F(25 ) MTBF DIMENSION 79*54*33mm (L*W*H) 210g ; 60pcs / 13.5kg / CARTON PACKING Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested PLUG CABLE Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GS25U-SPEC 2008-06-04 GS25U 20~25W AC-DC Single Output Wall-mounted type Mechanical Specification series Unit:mm 17 UL1185 16AWG 1230 50mm for 5V UL1185 18AWG 1830 50mm for 7.5~48V 70 10mm POWER LED C"+" 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE Plug Assignment 33 79 Standard plug: P1J (option) 54 P1J Derating Curve OUTPUT CENTER + Static Characteristics 100 100 LOAD (%) LOAD (%) P/N 70 0 10 20 30 Ta ( 40 ) 50 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:GS25U-SPEC 2008-06-04