U65S 80W AC-DC Single Output Desktop series Features : 3 pole AC inlet IEC320-C14 Class power (with earth pin) Full output 12~48V safety approval Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case Fix switching frequency and regulation Topology: PWM 3882 circuit With power ON/OFF switch(option) LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 2 years warranty TUV Rheinland Product Safety SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT geprUfre Sicherheit U65S105-P2J U65S106-P2J U65S107-P2J U65S108-P2J U65S109-P2J U65S111-P2J SPU65-105 SPU65-106 SPU65-107 SPU65-108 SPU65-109 SPU65-111 15V 18V 24V 5.33A 4.44A 3.33A 29V 2.75A 1.66A 0 ~ 1.66A Note.2 12V 48V RATED CURRENT 6.66A CURRENT RANGE 0~ 6.66A 0 ~ 5.33A 0 ~ 4.44A 0 ~3.33A 0 ~ 2.75A RATED POWER 80W 80W 80W 80W 80W 80W 100mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 100mVp-p VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 4.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.6 3.5% 2.5% 2.0% 1.5% 1.5% 1.0% SETUP, RISE, HOLD UP TIME 800ms, 50ms, 16ms at full load INPUT VOLTAGE RANGE 95 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 75% AC CURRENT 1.9A / 100VAC INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) 40A / 230VAC 0.75mA / 240VAC OVERLOAD 110 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE 140 ~ 370VDC 76% 77% Protection type : Shut down o/p voltage, re-power on to recover 0 ~ + 40 (Refer to output load derating curve) WORKING HUMIDITY 20% ~ 90% RH non-condensing SAFETY STANDARDS 81% 80% 110 ~ 140% rated output voltage WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 78% -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 3AXES 10min./1cycle, period for 60min. each along X, Y, Z axes UL1950, EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC , I/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P,I/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B EMC (Note. 7) OTHERS CONNECTOR NOTE HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY MTBF 100K hrs min. DIMENSION Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MIL-HDBK-217F (25 ) 168*78.5*44.5mm (L*W*H) 0.75kg; 25pcs / 19kg / CARTON PACKING PLUG Standard type P2J: 2.1 CABLE SPT-2 16AWG 6FT for 12V; SPT-1 18AWG 6FT for 15 ~ 48V; Other type available by customer requested * 5.5 * 11mm, center positive for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH Ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:U65S-SPEC 2008-05-08 U65S 80W AC-DC Single Output Desktop Mechanical Specification series Unit:mm 44.5 1.0 SPT-2 16AWG 1830 50mm for 12V SPT-1 18AWG 1830 50mm for 15 ~ 48V AC INPUT IEC 320 INLET 168.0 1.0 11 ID 2.1 x OD 5.5 4- R4 .5 POWER LED Plug Assignment 22.25 78.5 1.0 3 R1 P2J P/N OUTPUT CENTER + RUBBER FOOTX4 NAME PLATE Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 39.25 78.5 1.0 Standard plug: P2J (option) 60 0 10 20 25 Ta ( ) 30 40 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:U65S-SPEC 2008-05-08