PDM-80 Series 0 POWER DIVIDERS / COMBINERS 1 to 500 MHz / 8-Way / Lumped Element / Uniform Phase & Ampli. Bal./ Low Insertion Loss / SMA PRINCIPAL SPECIFICATIONS Frequency Freq. Model Range, Perform., Number MHz MHz PDM-80-100 1 - 200 PDM-80-275 50 - 500 1 - 100 100 - 200 50 - 500 † Isolation, Insertion Phase Amplitude VSWR Input dB, Loss, dB, Balance, Balance, dB, Max. Power, Min. Typ. Max. Typ. Max. Typ. Max. Typ. Input/Output Max. 28 20 25 30 25 30 1.0 2.0 1.7 0.8 1.5 1.3 † General Notes: 1. The PDM-80 series of 8-way Power Divider/Combiners cover 1 to 500 MHz using a special lumped element design for minimum insertion loss. This unit is especially applicable where overall space is limited. Package Outline 5° 8° 5° 2° 4° 3° 0.5 0.6 0.5 0.2 0.3 0.3 1.35:1/1.2:1 1.5:1/1.3:1 1.35:1/1.2:1 3W 3W CW input power when used as divider with 1.2:1 VSWRout GENERAL SPECIFICATIONS Coupling: Impedance: Internal Load Dissipation: Weight, nominal: Operating Temperature: -- 9 dB nom. 50 Ω nom. 250 mW max. 2.6 oz. (73 g) -- 55° to +85°C Typical Performance NOTES: 1. Tolerance on 3 place decimals ±.020(.51) except as noted. 2. Dimensions in inches over millimeters. 22Feb96 For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531