BUTTON AUTOMOTIVE RECTIFIER FARL2505 THRU FARL256 FARSL2505 THRU FARSL256 50 to 600 Volts CURRENT 25.0 Amperes AR-L FEATURES • • • • • VOLTAGE RANGE ARS-L 0.346(8.8)DIA 0.327(8.2)TYP 0.409(10.4)DIA 0.382(9.7)TYP Low Leakage Low forward voltage drop High current capability High forward surge current capacity Fast switching for high efficiency 0.051(1.3)DIA 0.047(1.2)TYP 0.051(1.3)DIA 0.047(1.2)TYP 1.0(25.4) MIN 1.0(25.4) MIN MECHANICAL DATA • • • • • • • 0.252(6.4) 0.236(6.0) 0.252(6.4) 0.236(6.0) Technology: Cell with vacuum soldered Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated lead , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.083 ounces, 2.32 grams 1.0(25.4) MIN 1.0(25.4) MIN Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS FARL2505 FARL251 FARL252 FARL254 FARL256 FARSL2505 FARSL251 FARSL252 FARSL254 FARSL256 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 Volts Maximum Average Forward Rectified Current, IO 25.0 Amps IFSM 300 Amps Rating for fusing (t＜8.3ms) I2t 374 A2S Maximum instantaneous Forward Voltage at 80A VF At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) 1.15 Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Maximum Reverse Recovery Time Test conditions IF=0.5A , IR=1.0A , IRR=0.25A Typical Thermal Resistance Operating and Storage Temperature Range 10 IR Volts UA 100 trr 150 200 nS RθJC 1.0 ℃/W TJ,TSTG (-65 to +175) ℃ Polarity and voltage demotion color band Red Yellow Notes: 1. 1.30 Enough heatsink must be considered in application. E-mail: [email protected] Web Site: www.cnmic.com Silver Green Green BUTTON AUTOMOTIVE RECTIFIER FARL2505 THRU FARL256 FARSL2505 THRU FARSL256 CURRENT 25.0 Amperes F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE AVERAGE FORWARD CURRENT, (A) 50 to 600 Volts FARL2505 THRU FARL256 FARSL2505 THRU FARSL256 RATINGS AND CHARACTERISTIC CURVES 30 25 20 Single Phase Half Wave 60Hz 10 VOLTAGE RANGE Resistive or 400 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tj max 300 200 Inductive Load 1 Cycle 0.375″(9.5mm) Lead Length 0 1 0 0 25 50 110 100 75 125 150 175 2 4 6 8 10 20 40 60 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION R FA 5 50 L2 -25 4 FA 100 AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 RL 6 25 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 60 40 SQUARE WAVE 20 0 0 10 0.8 1.0 1.2 1.4 1.6 30 40 AVERAGE FORWARD CURRENT, (A) 1.0 0.1 0.6 20 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: [email protected] Web Site: www.cnmic.com 50