MIC LPB502

PRESS FIT AUTOMOTIVE RECTIFIER
LPB501 THRU LPB506
LPBS501 THRU LPBS506
VOLTAGE RANGE
100 to 600 Volts
CURRENT
50.0 Amperes
LPB
LPBS
TECHNICAL SPECIFICATION:
Φ1.28±0.5
stannum
4.05± 0.2
10.30± 0.2
7.65± 0.5
Technology: Cell with Vacuum soldered
Case: Copper case
Polarity: As marked of case bottom
Lead: Plated lead , solderable per MIL-STD-202E
method 208C
Mounting: Press Fit
Weight: 0.17 ounces, 4.84 grams (LPB)
Weight: 0.14 ounces, 3.96 grams (LPBS)
9.00± 0.2
Φ10.18-10.23
Φ5.5-5.7
Φ5.5-5.7
Φ10.77-10.83
Φ8.2-8.8
Φ9.7-10.4
•
•
•
stannum
3.40± 0.2
MECHANICAL DATA
•
•
•
•
Φ1.28±0.5
34.75± 0.5
Low Leakage
Low forward voltage drop
High current capability
High forward surge current capacity
8.35± 0.5
•
•
•
•
35.45± 0.5
FEATURES
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60HZ, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
LPB501
LPB502
LPB504
LPB506
LPBS501
LPBS502
LPBS504
LPBS506
100
200
400
600
Volts
UNIT
Maximum Repetitive Peak Reverse Voltage
VRRM
Maximum RMS Voltage
VRMS
70
140
280
420
Volts
Maximum DC Blocking Voltage
VDC
100
200
400
600
Volts
Maximum Average Forward Rectified Current,
I(AV)
50
Amps
IFSM
600
Amps
Rating for fusing (t<8.3ms)
I2t
1494
A2S
Maximum instantaneous Forward Voltage at 100A
VF
1.08
Volts
At Tc=105℃
Peak Forward Surge Current
3.3mS single half sine wave superimposed on
Rated load (JEDEC method)
Maximum DC Reverse Current at Rated TA=25℃
DC Blocking Voltage
RθJC
0.8
℃/W
(-65 to +175)
℃
Polarity and voltage demotion color band (button)
Yellow
Silver
Notes:
1.
UA
400
TJ,TSTG
Typical Thermal Resistance
Operating and Storage Temperature Range
5.0
IR
TA=100℃
Enough heatsink must be considered in application.
E-mail: [email protected]
Web Site: www.cnmic.com
Orange
Green
PRESS FIT AUTOMOTIVE RECTIFIER
LPB501 THRU LPB506
LPBS501 THRU LPBS506
PEAK FORWARD SURGE
CURRENT,(A)
AVERAGE FORWARD CURRENT,
(A)
50
40
30
Single Phase
Half Wave 60Hz
Resistive or Inductive Load
10
8.3ms Single Half Sine-Wave
500
(JEDEC Method) Tj=Tj max
400
300
200
100
1 Cycle
1
0
25
50
75
50.0 Amperes
600
0.375″(9.5mm) Lead Length
0
CURRENT
F1G.2 MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
60
20
100 to 600 Volts
LPB501 THRU LPB506
LPBS501 THRU LPBS506
RATINGS AND CHARACTERISTIC CURVES
F1G.1 TYPICAL FORWARD CURRENT
DERATING GURVE
VOLTAGE RANGE
100
125
150
2
175
4
6
8 10
20
40
60 80 100
NUMBER OF CYCLES AT 60 Hz
CASE TEMPERATURE, (℃)
F1G.3 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
AVERAGE POWER DISSIPATION
(W)
F1G.4 FORWARD ROWER DISSIPATION
INSTANTANEOUS FORWARD CURRENT,
(A)
1000
100
10
60
40
SQUARE WAVE
20
0
0
20
1.0
0.8
1.0
1.2
1.4
1.6
40
50
AVERAGE FORWARD CURRENT, (A)
T1=25℃
PULSE WIDTH=300μS
1%DUTY CYCLE
0.1
0.6
30
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE,(V)
E-mail: [email protected]
Web Site: www.cnmic.com
60