SOZA CELL SOZA161 THRU SOZA166 VOLTAGE RANGE 100 to 600 Volts CURRENT 16.0 Amperes TECHNICAL SPECIFICATION： FEATURES • • • • .224(5.7) .217(5.5) Low Leakage Low forward voltage drop High current capability High forward surge current capacity DIA MECHANICAL DATA • • • • • 0.086(2.20) 0.078(2.0) Copper slug Technology: cell with vacuum soldered Polarity: red dots denotes cathode end Mounting Position: Any Weight: 0.0124 ounces, 0.35 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SOZA161 Maximum Repetitive Peak Reverse Voltage VRRM 100 200 300 400 600 Volts Maximum RMS Voltage VRMS 70 140 210 280 420 Volts Maximum DC Blocking Voltage VDC 100 200 300 400 600 Volts Maximum Average Forward Rectified Current, SOZA162 SOZA163 SOZA164 SOZA166 UNIT IO 16.0 Amps IFSM 300 Amps VF 1.10 Volts At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 80A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element IR TA=100℃ RθJC 0.8 ℃/W (-65 to +175) ℃ Notes: 1. UA 250 TJ,TSTG Typical Thermal Resistance Operating and Storage Temperature Range 5.0 Enough heatsink must be considered in application. E-mail: [email protected] Web Site: www.cnmic.com SOZA CELL SOZA161 THRU SOZA166 VOLTAGE RANGE 100 to 600 Volts CURRENT 16.0 Amperes RATINGS AND CHARACTERISTIC CURVES SOZA161 THRU SOZA166 F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 16 15 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE 12.5 10 7.5 Single Phase 5.0 Half Wave 60Hz Resistive or Inductive Load 2.5 400 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tj max 300 200 1 Cycle 0.375″(9.5mm) Lead Length 1 0 0 25 50 75 100 125 150 2 175 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 20 SQUARE WAVE DC 10 0 0 1.0 0.1 0.6 30 5 10 15 20 AVERAGE FORWARD CURRENT, (A) 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: [email protected] Web Site: www.cnmic.com 25