Metal SC-ST & SC-SC Duplex Adapters Features & Benefits • • • • • • • Applications • Local Area Networks (LAN’s) Metal housing • Telecommunication networks Quick and easy mounting Mounting holes and metal clip Alignment sleeve: zirconia or phosphor bronze Singlemode and multimode applications Compatible with Molex SC duplex shutters Designed to IEC and NTT standards Molex offers SC-ST* and SC-SC duplex adapters in metal housings with zirconia or phosphor bronze alignment sleeves suitable for singlemode and multimode applications. The adapter housing integrates both a metal clip for snap mount and two mounting holes (with or without thread) for flange mount. This eases the adapter installation. These adapters are compatible with Molex plastic SC duplex shutters which are available in different colors. *ST is a registered trademark of Lucent Technologies Mechanical Dimensions SC-SC Metal Duplex Adapter SC-ST Metal Duplex Adapter Standard Part Numbers Order Number Description 85335-0009 85335-0010 85335-0013 85335-0014 SC-ST metal duplex adapter, zirconia alignment sleeve, mounting holes without thread SC-ST metal duplex adapter, phosphor bronze alignment sleeve, mounting holes without thread SC-SC metal duplex adapter, zirconia alignment sleeve, mounting holes without thread SC-SC metal duplex adapter, phosphor bronze alignment sleeve, mounting holes without thread 86001-0088 Rev. 2 USA/30MFO/2000.09 ©2000, Molex Molex reserves the right to make any changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. MOLEX FIBER OPTICS DIVISION 5224 Katrine Avenue, Downers Grove, IL 60515 / Tel: 800-A1-FIBER or (630) 512-8787 Web: www.molex.com/fiber