OBSOLETE PRODUCT Contact factory for replacement model 1 WATT REGULATED DC/DC CONVERTER HL01R FEATURES L LOW COST L NON-CONDUCTIVE CASE L INTERNAL INPUT AND OUTPUT FILTERING L BUILT IN STANDOFFS L INDUSTRY STANDARD PINOUT DESCRIPTION L SHORT CIRCUIT PROTECTED The HL01R Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 125kHz push-pull oscillator is used in the input stage. Beat-frequency oscillator problems are reduced when using the HL01R Series with high frequency isolation amplifiers. mount devices and magnetics eliminate hand soldering operations. This "hands-free" construction increases quality and reliability while keeping cost low. NOMINAL RATED RATED INPUT CURRENT INPUT Reduced parts count and all surface mount construction add to the reliability of the HL01R Series. The use of surface ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................1.2W Short Circuit Duration....................................................Continuous Lead Temperature (soldering, 10 seconds max)................+300°C * *Note: Refer to Reflow Profile for SMD Models. TYPICAL PERFORMANCE CURVES HL01R revE,12/08 HL01R xxyzz Y/Z /H Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified. A OUTPUT VOLTAGE OUTPUT VOLTAGE CURRENT MIN LOAD (VDC) (VDC) (mA) (mA) HL01R05S05 HL01R05S12 HL01R05S15 5 5 5 5 12 15 200 83 67 50 50 50 400 400 400 58 52 52 HL01R12S05 HL01R12S12 HL01R12S15 12 12 12 5 12 15 200 83 67 40 40 40 160 160 160 58 52 52 HL01R15S05 HL01R15S12 HL01R15S15 15 15 15 5 12 15 200 83 67 30 30 30 130 130 130 58 52 52 HL01R24S05 HL01R24S12 HL01R24S15 24 24 24 5 12 15 200 83 67 20 20 20 80 80 80 58 52 52 HL01R05D05 HL01R05D12 HL01R05D15 5 5 5 ±5 ±12 ±15 ±100 ±41 ±33 50 50 50 425 400 400 45 53 53 HL01R12D05 HL01R12D12 HL01R12D15 12 12 12 ±5 ±12 ±15 ±100 ±41 ±33 40 40 40 185 160 160 45 53 53 HL01R15D05 HL01R15D12 HL01R15D15 15 15 15 ±5 ±12 ±15 ±100 ±41 ±33 30 30 30 145 130 130 45 53 53 HL01R24D05 HL01R24D12 HL01R24D15 PARAMETER 24 24 24 ±5 ±12 ±15 ±100 ±41 ±33 20 20 20 MIN 90 80 80 TYP 45 53 53 MAX UNITS 5.25 12.6 15.75 25.2 100 VDC VDC VDC VDC mAp-p VISO= 240VAC, 60Hz 1 25 2 10 VDC Vpk G7 pF μArms BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load 1 ±3 ±0.01 30 1 ±0.1 ±0.3 ±5 ±0.02 100 10 ±0.3 ±0.5 W % %/°C mVp-p mVrms % % MODEL CONDITIONS RATED LOADEFFICIENCY (mA) (%) INPUT Note: Other input to output voltages may be available. Please contact factory. COMMON SPECIFICATIONS Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified. A Voltage Range 4.75 11.4 14.25 22.8 Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign TEMPERATURE Specification Operation Storage Page 2 60 Hz, 10 Seconds 5 12 15 24 30 500 500 125 10 kHz g 675 kHr Circuit Stress Method -25 -40 -40 +70 +85 +110 °C °C °C HL01R revE,12/08 MECHANICAL Package/Pinout "Y" and "Z" TOP VIEWS HL01RxxyzzY HL01RxxyzzZ SIDE VIEWS END VIEWS DIP PACKAGE SMD PACKAGE NU = Do Not Use. NC = No Internal Connection. PIN CONNECTIONS Duplicate pin functions are internally connected. PIN# All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. 3 1 2 NU 10 11 12 13 14 15 -VOUT 22 23 24 +VIN RECOMMENDED LAND PATTERN HL01R revE,12/08 SINGLES +VIN NU Common -VOUT +VOUT -VIN -VIN +VOUT Common NU NU +VIN DUALS +VIN -VOUT Common +VOUT -VIN -VIN +VOUT Common -VOUT RECOMMENDED REFLOW PROFILE Page 3 Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 USA: Mansfield (MA), Tel: (508) 339 3000, email: [email protected] Canada: Toronto, Tel: (866) 740 1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] www.murata-ps.com email: [email protected] ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. Page 4 Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected] HL01R revE,12/08