Pb Free Product NCE7580D http://www.ncepower.com NCE N-Channel Enhancement Mode Power MOSFET DESCRIPTION The NCE7580D uses advanced trench technology and design to provide excellent RDS(ON) with low gate charge. This device is suitable for use in PWM, load switching and general purpose applications. GENERAL FEATURES ● VDS = 75V,ID =80A Schematic diagram RDS(ON) <8mΩ @ VGS=10V（Typ：6.5mΩ） ● Special process technology for high ESD capability ● Special designed for Convertors and power controls ● High density cell design for ultra low Rdson ● Fully characterized Avalanche voltage and current ● Good stability and uniformity with high EAS ● Excellent package for good heat dissipation Marking and pin Assignment Application ● Power switching application ● Hard Switched and High Frequency Circuits ● Uninterruptible Power Supply TO-263-2L top view Package Marking And Ordering Information Device Marking Device Device Package Reel Size Tape width Quantity NCE7580D NCE7580D TO-263-2L - - - Absolute Maximum Ratings (TA=25℃unless otherwise noted) Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS Limit Unit 75 V ±25 V ID 80 A ID (100℃) 78 A Pulsed Drain Current IDM 320 A Maximum Power Dissipation PD 30 W Peak diode recovery voltage dv/dt 170 V/ns 1.13 W/℃ EAS 580 mJ TJ,TSTG -55 To 175 ℃ Drain Current-Continuous Drain Current-Continuous(TC=100℃) Derating factor Single pulse avalanche energy (Note 5) Operating Junction and Storage Temperature Range Wuxi NCE Power Semiconductor Co., Ltd Page 1 v1.0 Pb Free Product NCE7580D http://www.ncepower.com Thermal Characteristic Thermal Resistance,Junction-to- Case (Note 2) RθJc Electrical Characteristics (TA=25℃unless otherwise noted) Parameter Symbol Condition 0.88 Min Typ ℃/W Max Unit Off Characteristics Drain-Source Breakdown Voltage BVDSS VGS=0V ID=250μA 75 V Zero Gate Voltage Drain Current IDSS VDS=100V,VGS=0V 1 μA Gate-Body Leakage Current IGSS VGS=±25V,VDS=0V ±100 nA Gate Threshold Voltage VGS(th) VDS=VGS,ID=250μA 2.85 4 V Drain-Source On-State Resistance RDS(ON) VGS=10V, ID=30A 6.5 8 mΩ gFS VDS=5V,ID=30A 60 S 3050 PF 280 PF 130 PF 15 nS On Characteristics (Note 3) Forward Transconductance 2 Dynamic Characteristics (Note4) Input Capacitance Clss Output Capacitance Coss Reverse Transfer Capacitance Crss VDS=50V,VGS=0V, F=1.0MHz Switching Characteristics (Note 4) Turn-on Delay Time td(on) Turn-on Rise Time tr VDD=30V,ID=2A,RL=15Ω 90 nS td(off) VGS=10V,RG=2.5Ω 40 nS 95 nS 56 nC 12 nC 16 nC Turn-Off Delay Time Turn-Off Fall Time tf Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd VDS=24V,ID=40A, VGS=10V Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) VSD Diode Forward Current (Note 2) IS Reverse Recovery Time trr Reverse Recovery Charge Qrr Forward Turn-On Time ton VGS=0V,IS=40A 1.2 V 80 A TJ = 25°C, IF = 75A 50 nS di/dt = 100A/μs(Note3) 48 nC Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production 5. EAS condition：Tj=25℃,VDD=50V,VG=10V,L=0.3mH,Rg=62Ω Wuxi NCE Power Semiconductor Co., Ltd Page 2 v1.0 Pb Free Product http://www.ncepower.com NCE7580D Test circuit 1）EAS test Circuits 2）Gate charge test Circuit: 3）Switch Time Test Circuit： Wuxi NCE Power Semiconductor Co., Ltd Page 3 v1.0 Pb Free Product NCE7580D http://www.ncepower.com TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS (curves) Figure1. Safe operating area Figure2. Source-Drain Diode Forward Voltage Figure3. Output characteristics Figure4. Transfer characteristics Figure5. Static drain-source on resistance Wuxi NCE Power Semiconductor Co., Ltd Page 4 Figure6. RDS(ON) vs Junction Temperature v1.0 Pb Free Product NCE7580D http://www.ncepower.com Figure7. BVDSS vs Junction Temperature Figure8. VGS(th) vs Junction Temperature Figure9. Gate charge waveforms Figure10. Capacitance Figure11. Normalized Maximum Transient Thermal Impedance Wuxi NCE Power Semiconductor Co., Ltd Page 5 v1.0 Pb Free Product NCE7580D http://www.ncepower.com TO-263-2L PACKAGE INFORMATION Symbol Dimensions In Millimeters Dimensions In Inches Min Max Min Max A 4.470 4.670 0.176 0.184 A1 0.000 0.150 0.000 0.006 B 1.170 1.370 0.046 0.054 b 0.710 0.910 0.028 0.036 b1 1.170 1.370 0.046 0.054 c 0.310 0.530 0.012 0.021 c1 1.170 1.370 0.046 0.054 D 10.010 10.310 0.394 0.406 E 8.500 8.900 0.335 0.350 2.540（TYP.） e 0.100（TYP.） e1 4.980 5.180 0.196 0.204 L 15.050 15.450 0.593 0.608 L1 5.080 5.480 0.200 0.216 L2 2.340 2.740 0.092 0.108 L3 1.300 1.700 0.051 0.067 V Wuxi NCE Power Semiconductor Co., Ltd 5.600 REF. Page 6 0.220 REF. v1.0 Pb Free Product http://www.ncepower.com NCE7580D ATTENTION: ■ ■ ■ ■ ■ ■ ■ ■ ■ Any and all NCE power products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your NCE power representative nearest you before using any NCE power products described or contained herein in such applications. NCE power assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all NCE power products described or contained herein. Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all NCE power products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of NCE power Semiconductor CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power product that you intend to use. This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice. Wuxi NCE Power Semiconductor Co., Ltd Page 7 v1.0