Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION • LOW LEAKAGE CURRENT (0.5µA TO 2.0µA max.) • LOW COST TANTALUM REPLACEMENT • DESIGNED FOR REFLOW SOLDERING CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes at 20°C Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life Test at Rated W.V. 85°C 2,000 Hours MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 85OC) Cap. (µF) 10 16 25 35 includes all homogeneous materials *See Part Number System for Details 6.3 10 16 25 35 50 8.0 13 20 32 44 63 0.24 0.20 0.18 0.14 0.12 0.10 6.3 10 16 25 35 50 4 3 2 2 2 2 8 8 4 4 4 4 Within ±25% of initial measured value Less than 200% of specified value Less than specified value MAXIMUM ESR (Ω AT 120Hz AND 20OC) Working Voltage (Vdc) 6.3 RoHS Compliant 6.3 ~ 50Vdc 0.1 ~ 100µF -40° ~ +85°C ±20%(M) 0.002CV or 0.5µA, whichever is greater W.V. (Vdc) S.V. (Vdc) Tanδ @ 120Hz/20°C W.V. (Vdc) Z-40°C/Z +20°C Z-55°C/Z +20°C Capacitance Change Tanδ Leakage Current Surge Voltage & Max. Tanδ Working Voltage (Vdc) 50 Cap. (µF) 6.3 10 16 25 35 50 - - - - - 1660 0.1 - - - - - 1.0 0.1 0.22 - - - - - 2.3 0.22 - - - - - 754 3.5 0.33 - - - - - 503 - - - - - 353 0.33 - - - - - 0.47 - - - - - 5 0.47 1.0 - - - - - 10 1.0 - - - - - 166 - - - - - 75.4 - - 50.3 2.2 - - - - - 15 2.2 3.3 - - - - - 18 3.3 - - - 4.7 - - - 18 20 23 4.7 - - - - 49.5 42.3 35.3 - 26.5 23.2 19.9 16.6 10 - - 25 28 30 34 10 22 31 35 39 52 54 - 22 18.1 15.1 12.1 10.6 9.05 - - 33 12.6 10.1 8.04 7.04 - - 8.47 7.06 5.65 - - - 3.98 3.32 - - - - 33 39 43 57 63 - NACL Series 47 47 59 68 - - - 47 100 71 76 - - - - 100 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency Correction Factor 50Hz ≤ f<100Hz 100Hz ≤ f<1KHz 1KHz ≤ f<10KHz f ≥ 10KHz 0.8 1.0 1.3 1.5 PRECAUTIONS ® NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 7 Surface Mount Aluminum Electrolytic Capacitors NACL Series STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap. (µF) Code Working Voltage (Vdc) 6.3 10 16 25 35 50 0.1 R10 - - - - - 4x5.5 0.22 R22 - - - - - 4x5.5 0.33 R33 - - - - - 4x5.5 0.47 R47 - - - - - 4x5.5 1.0 1R0 - - - - - 4x5.5 2.2 2R2 - - - - - 4x5.5 3.3 3R3 - - - - - 4x5.5 4.7 4R7 - - - 4x5.5 4x5.5 5x5.5 10 100 - - 4x5.5 5x5.5 5x5.5 6.3x5.5 22 220 4x5.5 5x5.5 5x5.5 33 330 5x5.5 - - 47 470 5x5.5 6.3x5.5 6.3x5.5 - - - 100 101 5x5.5 6.3x5.5 - - - 5x5.5 6.3x5.5 6.3x5.5 6.3x5.5 6.3x5.5 - Dφ L 0.3mm max. + I I - W A P B DIMENSIONS (mm) Case Size Dφ±0.5 L max. A/B±0.2 I ± 0.2 W 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 P±0.2 1.0 1.4 2.2 PART NUMBER SYSTEM NACL 100 M 35V 4.5x5.5 TR 13 F Series RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF ® 8 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com