MOS FET Relays
G3VM-353B/B1/E/E1
Analog-switching MOS FET Relay with SPST-NC
Contact. General-purpose Models Added.
• Switches minute AC and DC analog signals.
• General-purpose models (with high ON resistance) added.
• RoHS compliant
■ Application Examples
• Electronic automatic exchange systems
• Security systems
• Datacom (modem) systems
• FA systems and Measurement devices
Note: The actual product is marked differently from the image shown
here.
■ List of Models
Contact form
SPST-NC
Terminals
Load voltage (peak value)
PCB terminals
350 VAC
Model
G3VM-353B
Number per stick
Number per tape
50
---
---
1,500
G3VM-353B1
Surface-mounting
terminals
G3VM-353E
G3VM-353E1
G3VM-353E(TR)
G3VM-353E1(TR)
■ Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3VM-353B/B1
G3VM-353E/E1
7.12±0.25
7.12±0.25
6.4±0.25
6.4±0.25
7.62±0.25
7.62±0.25
0.8±0.25
+0.15
+0.15
3.65 −0.25
3.65 −0.25
0.25
Note: The actual product
is marked differently from the image
shown here.
1.2±0.15
0.5±0.1
2.54±0.25
2.5 min.
7.85 to 8.80
Weight: 0.4 g
Note: The actual product
is marked differently from the image
shown here.
4.0 +0.25
−0.2
1.0
min.
+0.1
−0.05
1.0 min.
2.54±0.25 1.2±0.15
10.0 max.
Weight: 0.4 g
■ Terminal Arrangement/Internal Connections (Top View)
G3VM-353B/B1
6
5
4
1
2
3
■ PCB Dimensions (Bottom View)
G3VM-353B/B1
2.54
Six 0.8-dia. holes
(0.56)
2.54
G3VM-353E/E1
6
5
4
1
2
3
■ Actual Mounting Pad Dimensions
(Recommended Value, Top View)
G3VM-353E/E1
2.54
2.54
8.3 to 8.8
(0.1)
(0.56)
(0.1)
1.3
1.5
MOS FET Relays
G3VM-353B/B1/E/E1
43
■ Absolute Maximum Ratings (Ta = 25°C)
Item
Input
Symbol
Rating
Unit
Measurement Conditions
LED forward current
IF
50
mA
Repetitive peak LED
forward current
IFP
1
A
100 μs pulses, 100 pps
LED forward current
reduction rate
Δ IF/°C
−0.5
mA/°C
Ta ≥ 25°C
LED reverse voltage
VR
5
V
Connection temperature
Tj
125
°C
VOFF
350
V
150 (100)
mA
Output Load voltage (AC peak/DC)
Continuous
Connection A IO
load current
(AC peak/DC) Connection B
Connection C
1. The dielectric strength between the input and
output was checked by applying voltage between all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Connection Diagram
Connection
A
150 (100)
Connection
B
300 (200)
ON current
Connection A Δ ION/°C −1.5 (−1)
reduction rate
Connection B
−1.5 (−1)
Ta ≥ 25°C
mA/°C
−3.0 (−2)
Connection C
Connection temperature
Note:
Tj
°C
125
Dielectric strength between input and VI-O
output (See note 1.)
2,500
Vrms
AC for 1 min
Connection
C
Operating temperature
Ta
−40 to +85
°C
With no icing or condensation
Storage temperature
Tstg
−55 to +125 °C
With no icing or condensation
Soldering temperature (10 s)
---
260
°C
10 s
Minimum
Typical
1
6
2
5
3
4
1
6
2
5
3
4
1
6
2
5
3
4
Load
AC
or
DC
Load
DC
Load
DC
Values in parentheses are for the G3VM-353B1/E1.
■ Electrical Characteristics (Ta = 25°C)
Item
Input
Symbol
Maximum
Measurement
conditions
Unit
LED forward voltage
VF
1.0
1.15
1.3
V
IF = 10 mA
Reverse current
IR
---
---
10
μA
VR = 5 V
Capacity between terminals
CT
---
30
---
pF
V = 0, f = 1 MHz
Trigger LED forward current
IFT
---
1
3
mA
IOFF = 10 μA
RON
---
15 (27)
25 (50)
Ω
IO = 150 mA (100 mA)
Output Maximum resistance
with output ON
Connection A
Connection B
---
8 (20)
14 (43)
Ω
IO = 150 mA (100 mA)
Connection C
---
4 (10)
7 (---)
Ω
IO = 300 mA (200 mA)
---
0.0105
(0.003)
1.0
μA
IF = 5 mA, VOFF = 350 V
Current leakage when the relay is open ILEAK
COFF
---
85 (30)
---
pF
V = 0, f = 1MHz, IF = 5 mA
Capacity between I/O terminals
CI-O
---
0.8
---
pF
f = 1 MHz, Vs = 0 V
Insulation resistance
RI-O
1,000
---
---
MΩ
VI-O = 500 VDC,
RoH ≤ 60%
Turn-ON time
tON
---
0.1 (0.25) 1.0 (0.5) ms
Turn-OFF time
tOFF
---
1.0 (0.5)
Capacity between terminals
A Connection
3.0 (1)
ms
IF = 5 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Values in parentheses are for the G3VM-353B1/E1.
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Minimum
Typical
Maximum
Load voltage (AC peak/DC)
VDD
---
---
280
Operating LED forward current
IF
Unit
V
5
---
25
mA
Continuous load current (AC peak/DC) IO
---
---
150 (100)
mA
Operating temperature
− 20
---
65
°C
Ta
Values in parentheses are for the G3VM-353B1/E1
44
MOS FET Relays
G3VM-353B/B1/E/E1
Note:
2. Turn-ON and Turn-OFF
Times
IF
1
6
2
4
RL
VDD
VOUT
IF
VOUT
10%
t ON
90%
t OFF
■ Engineering Data
G3VM-353B/E
LED forward current vs.
Ambient temperature
Continuous load current vs.
Ambient temperature
IO - Ta
80
60
40
20
20
40
60
80
100
C Connection
300
200
A,B Connection
100
0
−20
120
Ambient temperature Ta (ഒ)
0
20
Ta = 25°C
100
0
−100
0
1
100
30
10
5
3
1
0.5
0.1
0.6
120
0.8
1
5
80
100
IOFF = 10 μ A
4
3
2
1
0
−40
−20
0
tOFF
500
300
tON
100
50
30
10
LED forward current IF (mA)
30
50
100
VDD = 20 V, RL = 200 Ω
IF = 5 mA
tOFF
800
600
400
80
100
1000
VOFF = 350 V
IF = 5 mA
100
10
tON
200
0
−40
60
I LEAK - Ta
1200
1000
40
Current leakage vs.
Ambient temperature
tON, tOFF - Ta
VDD = 20 V, RL = 200 Ω
20
Ambient temperature Ta (ഒ)
Turn ON, Turn OFF time vs.
Ambient temperature
Ta = 25°C
1000
60
5
Ambient temperature Ta (ഒ)
Turn ON, Turn OFF time tON, tOFF (μS)
2000
40
1.8
IFC - Ta
10
20
1.6
Trigger LED forward current vs.
Ambient temperature
15
0
1.4
1.2
LED forward voltage VF (V)
t < 1s
tON, tOFF - IF
Turn ON, Turn OFF time tON, tOFF (μS)
80
IO = 150 mA
0
−20
2
Turn ON, Turn OFF time vs.
LED forward current
5
60
20
On-state voltage VON (V)
3
50
RON - Ta
On-state resistance RON (Ω)
Continuous load current IO (mA)
IO - VON
1
40
On-state resistance vs.
Ambient temperature
200
−1
Ta = 25°C
Ambient temperature Taഒ
Continuous load current vs.
On-state voltage
−200
−2
100
0.3
Trigger LED forward current I F C (mA)
0
400
Current leakage ILEAK (nA)
0
−20
IF - VF
500
LED forward current I F (mA)
100
Continuous load current I O (mA)
LED forward current IF (mA)
IF - Ta
LED forward current vs.
LED forward voltage
−20
0
20
40
60
80
Ambient temperature Ta (ഒ
MOS FET Relays
100
1
0
20
40
60
80
100
Ambient temperature Ta (ഒ)
G3VM-353B/B1/E/E1
45
■ Engineering Data
G3VM-353B1/E1
LED forward current vs.
Ambient temperature
Continuous load current vs.
Ambient temperature
IO - Ta
80
60
40
20
0
20
40
60
80
100
240
C Connection
200
160
120
A,B Connection
80
40
0
−20
120
0
Ambient temperature Ta (ഒ)
20
Ta = 25°C
100
50
0
−50
80
100
1
2
3
VDD = 20 V, RL = 200 Ω
tON
100
tOFF
5
10
30
0.8
1
30
20
10
0
20
40
50
100
LED forward current IF (mA)
MOS FET Relays
300
1.8
60
80
100
5
IOFF = 10 μA
4
3
2
1
0
−40
−20
0
20
40
60
80
100
Ambient temperature Ta (ഒ)
Turn ON, Turn OFF time vs.
Ambient temperature
Current leakage vs.
Ambient temperature
I LEAK - Ta
3000
VDD = 20 V, RL = 200 Ω
IF = 5 mA
tOFF
1000
300
tON
100
30
10
−40
1.6
1.4
IFC - Ta
t<1s
−20
1.2
Trigger LED forward current vs.
Ambient temperature
IO = 100 mA
0
−40
4
Turn ON, Turn OFF time tON, tOFF (μS)
Ta = 25°C
3
1
0.5
tON, tOFF - Ta
1000
10
1
3
LED forward voltage VF (V)
40
tON, tOFF - IF
30
5
Ambient temperature Ta (ഒ)
3000
300
10
0.1
0.6
120
Current leakage ILEAK (nA)
0
Turn ON, Turn OFF time vs.
LED forward current
Turn ON, Turn OFF time tON, tOFF (μS)
60
50
On-state voltage VON (V)
46
40
−100
−1
30
RON - Ta
On-state resistance RON (Ω)
Continuous load current IO (mA)
IO - VON
−2
50
On-state resistance vs.
Ambient temperature
150
−3
Ta = 25°C
Ambient temperature Taഒ
Continuous load current vs.
On-state voltage
−150
−4
100
0.3
Trigger LED forward current I F C (mA)
0
−20
IF - VF
280
LED forward current I F (mA)
100
Continuous load current I O (mA)
LED forward current IF (mA)
IF - Ta
LED forward current vs.
LED forward voltage
1000
VOFF = 350 V
300 IF = 5 mA
100
30
10
3
−20
0
20
40
60
Ambient temperature Ta (ഒ
G3VM-353B/B1/E/E1
80
100
1
0
20
40
60
80
Ambient temperature Ta (ഒ)
100
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
MOS FET Relays
G3VM-353B/B1/E/E1
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X302-E-1
MOS FET Relays
08/09
Specifications subject to change without notice
G3VM-353B/B1/E/E1
Printed in USA