OPLINK OFMS120M810

OFMS Series Multi-mode 1x1, 1x2 and 2x2
(Add/Drop) Optical Fiber Switches
OFMSMM Series
Product Description
Oplink’s OFMS series optical fiber switches offer industry leading performance specifications with Telcordia compliant reliability. The multi-mode
switches are designed for use in protection, channel selection, fiber ring
network node bypassing and testing.
These patented opto-mechanical switches can be directly mounted on printed circuit boards and feature less than 0.5dB typical insertion loss. Oplink’s
unique prism design improves the switch repeatability and stability. The
OFMS switches are GR-1221 and GR-1073 qualified.
Oplink provides customized design to meet special control and applications.
Also, Oplink offers modular assemblies that integrate other components to
form a full function module or subsystem.
Performance Specificationns
Parameters
Symbol
Wavelength Range
λop
Insertion Loss
IL
1
Cross-talk
Min
Typ.
770 ~ 890 and/or 1260 or 1360
1.0
40
±0.05
Return Loss
RL
30
300
Non-latching
mW
145 ± 10%
Ω
10 7
ms
10
4.5 ~ 5.5
VDC
Operating Temperature
Top
0
70
°C
Storage Temperature
Tsto
-40
80
°C
Fiber Type
Dimension
 Low Insertion Loss
 Wide Wavelength Range
 Highly Stable & Reliable
 Epoxy-Free Optical Path
 Latching or Non-latching Configurations
Hz
Two coils, latching or single coil, non-latching
2
Features
cycle
Cycle Rate
Driving Voltage
dB
Ω
10
Switch Relay Type
dB
101.2 ± 10%
Switching Speed
Durability
nm
dB
Optical Input Power
Latching
Unit
dB
Repeatability
Coil Resistance
Max
50μm or 62.5μm core multi-mode fiber
Bare fiber
P1: 41.5 (L) x 15.5 (W) x 9.0 (H)
mm
900μm loose tube
P2: 44.0 (L) x 15.5 (W) x 9.0 (H)
mm
Applications
 Optical Bypass Protection
 Optical Routing
 Fiber Optic Component Test
Notes:
1) Based on FOTP-34 method A, steady state equilibrium launch conditions. Within operating temperature range. Exclude connector insertion loss.
2) A minimum >20ms pulse is recommended for latching type of switch.
R02.20090524
OFMS Series Multi-mode 1x1, 1x2 and 2x2
(Add/Drop) Optical Fiber Switches
OFMSMM Series
Function Diagram
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
1x1 On/Off Switch
1x2 Switch
2x2 Add/Drop Switch
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
M
OFMS
Multi-mode
Type
1x1 = 110
1x2 = 120
2x2 Add/Drop = 22A
Switch Type
Fiber Length
Latching = 0
Non-latching = 1
0.5 meter = H
1.0 meter = 1
1.5 meter = 5
2.0 meter = 2
Wavelength
Fiber Type
850nm = 8
1310nm = 3
850 &1310nm = D
MMF 50/125 fiber = 1
MMF 62.5/125 fiber = 2
Package Type
P1 (bare fiber) = 1
P2 (900μm loose tube) = 2
Connector
Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
Mounting Type
Dual-line pins on the bottom = 0
Single-line pins on the side with screw tabs = 1
R02.20090524
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules