Fused Single-Mode WDM (980/1550nm) SWDM59 Series Product Description Oplink’s 980/1550nm fused single-mode wavelength division multiplexers are manufactured using the proven fused biconical taper technology and Oplink’s stringent quality procedures. With low insertion loss and flat passband, this device is ideal for combining pump (980nm) and signal light at 1550nm in optical fiber amplifiers. Oplink can provide customized designs to meet specialized feature applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. Port 2 Signal L Port 1 In Ø Port 4 (terminated for 1x2 configuration) Port 3 Pump Features Ultra Low Insertion Loss Performance Specificationns SWDM59 Series Premium Operating Wavelength Insertion Loss (970 - 990nm / 1535 - 1565nm) Ultra High Isolation Grade A Grade B Unit High Directivity 970 - 990nm / 1535 - 1565nm < 0.1 < 0.2 < 0.3 dB Isolation > 20 dB Polarization Dependent Loss < 0.1 dB Directivity > 55 dB Maximum Power Handling 500 mW Operating Temperature - 10 to + 70 °C Storage Temperature - 40 to + 85 °C Fiber Type Package Dimensions P1: 250µm bare fiber P2: 900µm loose tube (ø)3.0 x (L)54 (ø)3.0 x (L)60 High Stable & Reliable Bidirectional Applications Telecommunications HI1060 FLEX & HI980 ** Low Polarization Sensitivity mm Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. CATV Subscriber Loop Local Area Networks Fiberoptic Sensors R01.20080624 Fused Single-Mode WDM (980/1550nm) SWDM59 Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. SWDM 5 9 S Grade Wavelength 1550/980nm= 59 Type Standard= S Configuration 1x2 = 1 2x2 = 2 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com 0 0 Premium Grade = P A Grade = A B Grade = B Fiber Length 0.5 Meter = H 1.0 Meter = 1 * 1.5 Meters = 5 2.0 Meters = 2 Package & Fiber Type P1+ HI1060 = 16 P1+ HI980 = 19 P2+ HI1060 = 26 P2+ HI980 = 29 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Notes : * 1 meter is standard. The lead time for special fiber length will be longer. R01.20080624 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules