OTS-6SD Optiva Standard, 6 SDI ™ SDI Video Transmission The OTS-6SD provides for the digital transmission of 6 Channels of uncompressed SDI Video, at absolute broadcast quality. Video Audio Data System Design SDI Video In All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ SDI Video Out SDI Video In A L E R T S T A T U S SDI Video In SDI Video Out A L E R T S T A T U S SDI Video Out ST, LC, SC or FC A L E R T S T A T U S A L E R T S T A T U S ST, LC, SC or FC Opti va™ Opti va™ Opti va™ Opti va™ VAD Transmission VAD Transmission VAD Transmission VAD Transmission OTS-6SDT OTS-6SDR Features • Uncompressed SDI Video over one fiber • TDM - Single Wavelength • Complies with SMPTE 259 for uncompressed SDI Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • Compatible with MDM-7000 Series for WDM and CWDM multiplexing The Optiva™ bandwidth requirement of this system is 2,106 Mbps. • Ideal for Broadcast/Studio and Professional AV applications • No EMI or RFI and no ground loops • Stand alone or rack-mount Versions Available* Wavelength (nm) & Fiber Transmit** Receive** 1310 Multimode 1310 Singlemode 1310 Singlemode(D) 1550 Singlemode 1550 Singlemode (D) 1270-1610 SM (CWDM) OTS-6SDT-B1-XX-IC OTS-6SDT-B2-XX-IC OTS-6SDT-B2D-XX-IC OTS-6SDT-B3-XX-IC OTS-6SDT-B3D-XX-IC OTS-6SDT-L4-XX-IC OTS-6SDR-B1-XX-IC OTS-6SDR-B2-XX-IC OTS-6SDR-B2D-XX-IC OTS-6SDR-B3-XX-IC OTS-6SDR-B3D-XX-IC OTS-6SDR-L4-XX-IC Non-Optical Version OTS-6SDT-NOC-IC OTS-6SDR-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 7 12 17 25 Varies 1.5 10 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological Test Code Bit Rate Bit error rate Connector Optiva™ Configurable SMPTE 259 RP-178 270 Mbps 10-14 BNC (IEC 60169-8) Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite 11 oz RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration