OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: [email protected] Series 400 - Ceramics Features thin film technology - preliminary size 3,0(L) x 2,0(W) x 1,0(H) mm circuit substrate: Al2O3 Ceramics devices are ROHS conform lead free solderable, soldering pads: gold plated taped in 8 mm blister tape, cathode to transporting perforation all devices sorted into luminous intensity classes taping: face-up (T) high luminous intensity types sorted in color-temperatur (CCT) classes Absolute Maximum Ratings IF, max[mA] IF,P [mA] tp ≤ 100 µs τ=1: 10 100 30 VR [V] IR, max [µA] 5 100 Thermal resistance R thJA [K / W] 60 TOp [°C] TSt °[C] -40...85 -40...100 IF [mA] 30 Maximal forward current (DC) characteristic 20 10 0 -40 -20 0 20 40 60 80 100 Top[°C] electrostatic discharge classification (MIL-STD-883E) class 1 Electro-Optical Characteristics Type Emitting color white warm white OCL-400 EW OCL-400 EWW Marking at anode anode Measurement IF [mA] 20 20 typ 3,2 3,2 VF[V] max 3,8 3,8 color coordinates 0,32/0,33 0,45/0,41 IV[mcd] min typ 300 500 300 500 0,42 0,48 0,40 7 0,38 7 3 Y 1 4 0,40 2500 K 0,42 5 color coordinates classes 2 3000 K 6000 K 5 4 0,44 6 7000 K 0,32 8000 K Y 0,34 4500 K 5000 K 0,36 0,30 6 0,46 3 0,28 0,38 2 0,26 1 0,36 0,24 0,30 0,32 0,34 X white 0,36 0,42 0,44 0,46 0,48 X warm white © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 03/08 90 120 1,0 60 0,8 0,6 30 150 view angle 0,4 0,2 0,0 180 0 0,2 0,4 0,6 0,8 1,0 10 IF (mA) EW and EWW UF – IF characteristic 1 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 UF (V) Iv rel (at 20 mA ) 2 EW and EWW 1 IF – Iv, rel characteristic 0 10 20 30 IF (mA) © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 03/08 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 250 Temperature (°C) 10-20 s 230°C 200 150 IR reflow soldering profile Max. 40 s 100 50 0 50 100 150 200 250 300 Time (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300°C © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 03/08 Ordering Code For Parts Series Color OCL-400 - ??????? Encapsulation - XD - Packaging T T - taped XD - uncolored diffused Type definition, e.g. OCL-400 EW-XD-T LED Luminous Intensity Groups And Subgroups [ mcd ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 - 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 M: N: P: Q: R: S: T: U: V: W: X: Y: Z: 18 28 45 71 112 180 280 450 710 1120 1800 2800 4500 - 28 45 71 112 180 280 450 710 1120 1800 2800 4500 7100 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 - 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Q1: Q2: R1: R2: S1: S2: T1: T2: U1: U2: V1: V2: W1: W2: X1: X2: Y1: Y2: Z1: Z2: 71 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 - 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 7100 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. Special service: Brightness selection in subselections possible. Color selection in subselections possible (each subgroup per reel ). Attention please: The LED output is strong enough to injure human eyes. Precautions must be taken to prevent locking directly at the LED with unaided eyes for more than a few seconds. Flashing lights have been known to cause discomfort in people, you can prevent this by taking precautions during use. Also, people should be cautions when using equipment where these LED´s are incorporated. © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected] preliminary edition 03/08 Tape And Reel Packing D 180 mm 330 mm Packing: Parts/reel 2000 8000 The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. XXXXXXXXX Type OCL-400 ?????-??-T Intensity group ZZ Charge No. 1122-AAAAAA Quantity 9999 Customer order No. Color class: CC Color class - optional 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2008 OSA Opto Light GmbH Tel. +49-(0)30-65 76 26 83 Fax +49-(0)30-65 76 26 81 [email protected]