Oscilent Corporation | 264 Series Quartz Crystal Page 1 of 2 SMD Quartz Crystal Series Number Package Description Last Modified 264 7x5mm Chip Type SMD Quartz Crystal July 28 2008 FEATURES - 7x5mm Chip Type quartz crystal - Low profile - Tight stability / High reliability - Cost Efficient - Tape and Reel - RoHS / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range Frequency Tolerance CHARACTERISTICS UNITS fo 12.00 ~ 35.00 MHz @ 25ºC ±30 ppm Ta = -20 +70ºC ±50 ppm Operating Temperature TOPR -20 ~ +70 ºC Storage Temperature TSTG -40 ~ +85 ºC Frequency Stability Shunt Capacitance Co 7.0 max. pF Load Capacitance CL (Customer Specified) 18 ~ 30, Series pF . EQUIVALENT SERIES RESISTANCE / MODE OF OSCILLATION . FREQUENCY RANGE (MHz) MODE MAX ESR Ohm 12.000 ~ 16.000 Fundamental 60 16.001 ~ 35.000 Fundamental 40 Oscilent Corporation | 264 Series Quartz Crystal Page 2 of 2 PART NUMBER GUIDE Series Number Frequency Load Capacitance Operating Temp ( ºC ) 264 - 12.0M - 20 -S Oscilent Enter frequency e.g. 12.0M for 12.000 MHz Enter capacitance e.g. -20 S = for 20pF . Enter -SR for Series Resonance. -20~+70 Packaging** - TR Blank* = Bulk TR = Tape/Reel NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: Click on the packaging name above for tape/reel specifications Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Series No.: 264