RS1AB thru RS1MB SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SMB/DO-214AA .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .030(0.76) .050(1.27) .004(.102) .008(.203) .200(5.08) .220(5.59) Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA Ldeaf for surface mount applications Glass Passivated Chip Low Reverse Leakage Current Low Forward Voltage Drop And High Current Capability Plastic Meterial Has UL Flammability Classificatiom 94V-0 Case JEDEC DO-214AA molded plastic Epoxy UL 94V-0 rate flame retardant Metallurgically bonded construction Polarity Color band denotes cathode end Mounting position Any Weight 0.003 Ounce, 0.093 grams MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL RS1AB RS1BB RS1DB RS1GB RS1JB RS1KB RS1MB UNITS Maximum Repetitive Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current .0375 (9.5mm)Lead Length at TA =550C I(AV) 1.0 Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneoue at 1.0A DC VF 1.3 Volts Maximum DC Reverse Current @TA=25 C at Rated DC Blocking Voltage @TA=1000C IR 5.0 100 A Maximum Reverse Recovery Time TRR Typical Junction Capacitance CJ 15 Operating Temperature Range TJ +175 0 TSTG -65 to +175 0 200 400 600 800 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts 150 NOTES 1. Measured at 1 MHz and applied reverse Voltag of 4.0VDC 2. Thermal Resistance Junction to case www.paceleader.tw Volts Amps 0 Storage Temperature Range 1000 100 50 1 250 500 nS pF C C RS1AB thru RS1MB SURFACE MOUNT FAST RECOVERY RECTIFIER PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES RATING AND CHARACTERISTICS CURVES RS1AB THRU RS1MB 1.0 0.8 0.6 0.4 0.2 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 175 30 20 10 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 0 1 2 FIG.1 Forward Current Derating Curve 20 10 50 100 FIG.2 Maximum Non-Pepetitive Surge Current 1000 INSTANTANEOUS REVERSE CURRENT, (uA) 10 INSTANTANEOUS FORWARD CURRENT, (A) 5 NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE , C 1.0 TJ = 25 C 0.1 100 TJ = 100 C 10 1.0 TJ = 25 C 0.1 PULSEWIDTH:300 s .01 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 40 60 80 100 120 140 FIG.4 Typical Reverse Characteristics FIG.3 Typcial Forward Characteristics www.paceleader.tw 20 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, (VOLTS) 2