SB820F thru SB8100F ISOLATION SCHOTTKY BARRIER RECTIFIER VOLTAGE - 20 TO 100 VOLTS CURRENT - 8.0 AMPERES ITO-220AC FEATURES MECHANICAL DATA Plastic package has Underwriters laboratory Flammability Classification 94V-0 utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MILS-19500 / 228 Low power loss, high efficiency Low forward voltage. high current capability High surge capability For use in low voltage, high frequency inverters Free wheeling. And polarlity protection applications High temperature soldering 260oC/10seconds at terminals Pb free product are available 99% Sn above can meet RoHS environment substance directive request Case ITO220AC full molded plastic package Terminals Lead solderable per MIL-STD-202, Method 208 Polarity As marked. Mounting Position Any Weight 0.08 ounce, 2.24gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL SB820F SB830F SB840F SB850F SB860F SB880F SB8100F UNITS Maximum Repetitive Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 Maximum Average Forward Rectified Current at TC=1000C I(AV) 8.0 Amps Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 150 Amps Maximum Forward Voltage at 8.0A VF 0.55 0 Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1000C Typical Thermal Resistance Operating and Storage Temperature Range Storage Temperature Range www.paceleader.tw 0.85 Volts 0.5 50 IR R 0.75 Volts 6 JC mA 0 C/W TJ -50 to +150 0 TJ TSTG -50 to +150 0 1 C C SB820F thru SB8100F ISOLATION SCHOTTKY BARRIER RECTIFIER RATINGS AND CHARACTERISTIC CURVES SB820F THRU SB8100F www.paceleader.tw 2