SK22 thru SK210 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE - 20 TO 100 VOLTS CURRENT - 2.0 AMPERES SMA/DO-214AC .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA Plastic package has Underwriters Laboratory Flamm ability Classification 94v-0 For surface mount applications Low profile package Built-in strain relief Metal to silicon rectifier, majority carrier conduction Low power loss,high efficiency High surge capacity High current capacity Low VF Foruse in low Voltage high frequency inverters, free wheeling. and polarity protection applications. High temperature soldering guaranteed 260oC/10 seconds at terminsls High temperature soldering 260oC/10 seconds at terminsls Pb free product at available 99% Sn above meet Rohs Environment substance directive request Case JEDEC DO-214AC molded plastic Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Color band denotes cathode end (cathode) Standard Package 12mm tape (EIA STD EIA-481) Weight 0.002 ounce, 0.064gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Resistive or inductive load SYMBOL SK22 SK23 SK24 SK25 SK26 SK28 30 40 50 60 80 SK29 SK210 UNITS Maximum Repetitive Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 14 21 28 35 42 56 64 71 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 90 100 Volts Maximum Average Forward Rectified Current at TL (Figure 1) I(AV) 2.0 Amps Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 50 Amps Maximum Instantaneous Forward Voltage at 2.0A VF 20 0.5 0 Maximum DC Reverse Current (NOTE 1) TA=25 C at Rated DC Blocking Voltage TA=1000C Maximum Thermal Resistance (NOTE 2) Operating Junction Temprature Range Storage and Operating Temperature Range 20 60 JA JL Volts 0.85 Volts mA 0 C/W TJ -50 to +150 0 TSTG -55 to +150 0 NOTES 1. Pulse test with 300 S pulse width, 2% duty cycle 2. Mounted on P.C.B with 5.0mm2 (0.13mm thick) copper pad areas www.paceleader.tw 100 0.5 10 IR R R 0.7 90 1 C C SK22 thru SK210 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER RATING AND CHARACTERISTICS CURVES SK22 THRU SK210 www.paceleader.tw 2