RADSL CP Transformer ELECTRONICS INC. EPB5095G • Designed to meet Supplementary Insulation Requirement of IEC950 for 250 VAC Working Voltage • Excellent THD Characteristic • Isolation : 2000 Vrms • SMD Package Electrical Parameters @ 25° C Pri. OCL (uH ± 10%) Sec. OCL (uH ± 10%) Interwinding Capacitance (pF Max.) Insertion Loss (dB Max.) Total Harmonic Distortion (dB Max.) Longitudinal Balance (dB Min.) Turns Ratio (Pri.:Sec. ±1%) 35 KHz to @100 KHz, 35 KHz to @ 100 KHz, 1.0 MHz 15 V p-p 650 KHz 0.1 Vrms 437 10 10 20 -0.5 -80 -60 1:2.9 1:1 1.5 1-4:10-6 2-5:10-6 Pins 10-6 Pins Pins 10-6 to Pins 2-5 Pins Pins Pins 1-4 Pins 10-6 w/ 7, 9 w/ 7, 9 w/ 7, 9 1-4 to 10-6 w/ 2-5 open, w/ 1-4 open, 1-4 to 10-6 2-5 to 10-6 1-5 w/ 7, 9 w/ 7, 9 shorted shorted shorted w/ 7, 9 & 4, 2 6,7,9,10 w/ 7, 9 w/ 7, 9 6,7,9,10 shorted shorted shorted shorted shorted shorted shorted • Secondary Wdg. Impedance : 100 Ω • DCR : 0.5 Ω @ Pins 1-4, 2.0 Ω @ Pins 2-5, 2.0 Ω @ Pins 10-6 w/ 7, 9 shorted • • DC Unbalanced Current : 2.0 mA @ Pins 1-5 w/ 2, 4 shorted • @ 100 KHz, @ 100 KHz, 0.1 Vrms 0.1 Vrms 55 Pins 1-4 Leakage Inductance (µH Max.) @ 100 KHz, 0.1 Vrms Schematic Pri. Driver Side Sec. 1 10 4 7 2 9 5 6 Line Side Package .490/.530 (12.45/13.46) Pin 1 I.D. Marking: PCA EPB5095G D.C. .026/.030 (.660/.762) .098 (2.49) .100 (2.54) .506/.516 .700 (12.85/13.11) (17.78) .095/.105 (2.41/2.67) .051 (1.29) .010/.014 (.254/.356) .470 (11.94) 0°-8° .039 (.991) 3.95/.405 (10.03/10.29) .005/.015 (.127/.381) .665/.675 (16.89/17.15) Documentor/Date √’d By Project Engineer/Date Engineering/Date Quality Assurance/Date Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSB5095G Rev. 1 2/17/04 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com