Home Phone Networking Magnetics Module ELECTRONICS INC. EPB5218G • Designed for HPNA 3.0 Applications • Robust construction allows for IR/VP processes • Improved Common Mode Attenuation Electrical Parameters @ 25° C Insertion Loss 1 (dB Max/) Cut-off Frequency Return Loss (dB Min.) Attenuation (dB Min.) Lower Band Upper Band 4.75 MHz-20.5 MHz 4.75 MHz-20.5 MHz 4 22 -2 -12 1.1 MHz 2.2 MHz 24.3 MHz 100 MHz 200 KHz-50 MHz -8 -60 -40 -34 -60 Common to Differential (dB Min.) • Note 1: Referenced to center frequency of 9.38 MHz • Filter Characteristic Impedance : 100 Ω • Schematic Input Impedance Chip Side With 100 Ω load across pins 1 and 2, please refer to the table below. The magnitude of the input impedance shall be > 10 Ω from 0-30 MHz and shall conform to the following lower-bound mask: Cable Side 1 10 Frequency Range (KHz) BPF 3 2 9 Minimum Impedance Ω 0 < f < = 0.285 0.285 < f < = 2.85 2.85 < f < = 28.5 28.5 < f < = 95 95 < f < = 190 190 < f < = 285 285 < f < = 380 380 < f < = 475 475 < f < = 570 570 < f < = 665 665 < f < = 760 760 < f < = 855 Pins 4,5,6,7,8,11,12,13,14,15 & 16 1M 100 K 10 K 4.0 K 2.0 K 1.4 K 1.0 K 850 700 600 525 450 Frequency Range (KHz) Minimum Impedance Ω 855 < f < = 950 950 < f < = 1000 1000 < f < = 1400 1400 < f < = 2300 2300 < f < = 2850 2850 < f < = 3085 3085 < f < = 4000 4000 < f < = 4750 20250 < f < = 21000 21000 < f < = 25000 25000 < f < = 30000 400 350 175 100 50 25 10 30 30 25 50 Package 1.000 (25.40) PCA EPB5218G Date Code Pin 1 I.D. .090 (2.29) .100 (2.54) .150 (3.81) .480 (12.19) .670 (17.02) .700 (17.78) Pad Layout .030 (.762) .010/.015 (.254/.381) .260 (6.60) .008/.012 (.203/.305) 0°-8° .035 (.889) .016/.022 (.406/.559) .100 (2.54) .600 (15.24) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSB5218G Rev. 3 5/21/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com