CEP8 Line Interface Transformer ELECTRONICS INC. EPD1035GE • Designed to meet the Requirements of IEC60950 with Working Voltage of 250 V • Excellent THD Characteristic • Operating Temperature : -40°C to +85°C • Hipot : 1875 Vrms, (for 1 second; 500 µA Max. Leakage) Electrical Parameters @ 20° C Inductance (µH ± 5%) Dielectric (Vdc) Leakage Inductance µH Max.) Interwinding Capacitance (pF Max.) Total Harmonic Distortion (dB Max.) Longitudinal Balance (dB Min.) @ 10 KHz , 0.1 Vrms @ 500 µA Max. Leakage @ 100 KHz, 0.1 Vrms @ 100 KHz, 0.1 Vrms @ 10 KHz, 1.5 Vrms 30 KHz - 1.1 MHz 470 Pins 8-5 with 6-7 shorted 650 Core to Wdg’s 17 Pins 8-5 with 6-7, 1-2-3-4 shorted 7.0 Pri.-Sec. -72 Line Side -55 --- DCR (Ω ± 10%) 1.50 Pins 1-3/2-4 2.00 Pins 8-6/7-5 • Line Side Impedance : 100 Ω • Schematic 1 8 3 6 2 7 Line Side Chip Side 5 4 1.26:1 ± 1% Package .400 Max. (10.16) Suggested Pad Layout .500 (12.70) Pin 1 I.D. .235 (5.97) .098 (2.50) .410 (10.41) .098 (2.50) .030 (.762) .016 (8x) (.406) Marking: PCA EPD1035GE D.C. .410 (10.41) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSD1035GE Rev. - 1/16/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com