10Base-T Interface PCMCIA Module ELECTRONICS INC. EPE6379SE & EPE6379SE-RC • 1500 Vrms Isolation • Robust design allows for toughest soldering processes • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant • Operating Temperature : -40°C to +85°C • Storage Temperature : -40°C to +125°C Electrical Parameters @ 25° C Interwinding Capacitance (pF Max.) Primary Leakage Inductance (µH Max.) @ 100 KHz, 0.1 Vrms @ 100 KHz, 0.1 Vrms OCL (µH Min.) 100 KHz, 0.1 Vrms 200 35 Pins 1-3 Pins 6-8 Turns Ratio 1CT:1CT 1CT:2.5CT Xmit & Rcv 15 0.4 Pins 1-3:16-14 Pins 6-8:11-9 Package .085 (2.16) .050 (1.27) .070 (1.78) Pin 1 I.D. .270 (6.86) Pad Layout .440 (11.18) .350 (8.89) .076/.084 (1.93/2.13) .030 (.762) .033/.008 (.076/.203) .050 (1.27) 0.8 0.8 1 16 2 15 3 14 6 11 7 10 8 9 .360 (9.14) Notes : 1. Lead Finish EPE6379SE EPE6379SE-RC SnPb Hot Dipped Sn or SAC 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information Rcv .008/.012 (.203/.304) 0°-8° .035 (.889) .018/.022 (.457/.559) Xmit Schematic .490 (12.45) PCA EPE6379SE(-RC) Date Code Primary DCR (Ω Max.) (Tube) (Tape & Reel) 260°C MSL = 4 (72 Hours, ≤30°C/60%RH) 0.84 grams 0.84 grams 39 pieces/tube 39 pieces/tube 600 pieces/13” reel 600 pieces/13” reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6379SE & -RC Rev. 2 3/11/08 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com