10Base-T Interface Module ELECTRONICS INC. EPE6382 • General Purpose 10 Base-T Filter Module for Adapter Cards, MAUs,Hubs & Motherboard Applications • Complies with or exceeds IEEE 802.3, 10 Base-T Requirements • Available in 16 Pin DIP Package • 2000 Vrms Isolation Electrical Parameters @ 25° C Sine Wave Inductance (µH Min.) Interwinding Capacitance (pF Max.) Leakage Inductance (µH Max.) @ 100 KHz, 20 mVrms @ 100 KHz, 20 mVrms @ 100 KHz, 20 mVrms 140 15 0.5 Turns Ratio (± 5%) Xmit 1CT: 2CT DCR (Ω Max.) Rcv 1CT: 1CT 0.4 Pins 6-8/1-3 Schematic 16 15 14 11 10 9 1 2 3 6 7 8 Package .800 (20.32) .045 (1.14) Pin 1 I.D. PCA EPE6382 Date Code .270 (6.86) .700 (17.78) .240 (6.07) .018 (.457) .125 ± .020 (3.18 ± .510) .100 (2.54) .008/.012 (.203/.305) .340 ± .020 (8.64 ± .510) .020 (.508) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6382 Rev. 2 3/6/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com