10/100Base-TX Interface Module for NIC/HUB Applications ELECTRONICS INC. EPF8024G • Optimized for QSI6611/6612 PHY/MAC • Guaranteed to operate with 8 mA DC Bias at 70°C on Cable Side • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL (@ 70°C) Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 100 KHz, 0.1 Vrms 8 mA DC Bias 1-80 MHz 80-100 MHz 100-150 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-30 MHz 30-100 MHz 100-500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -2/-2 -3.5/-3 -18/-18 -12/-12 -10/-10 -40/-40 -30/-30 -10/-10 • Isolation : 1500 Vrms • 5-10 MHz 10-100 MHz -35 -35 Impedance : 100 Ω • Rise Time : 3.0 nS Max. • Schematic Receive Channel Transmit Channel RD+ 1 7 RX+ 10 TX+ TD+ 16 CT 3 CT 14 RD- 2 6 RX1:1 TD- 15 11 TX2 :1 5 CT 12 CT Package .980 (24.89) .200 (5.08) .100 (2.54) .140 (3.56) Pin 1 I.D. PCA EPF8024G Date Code .390 (9.91) .560 (14.22) .600 (15.24) .247 Max. (6.27) .017/.022 (.432/.559) .092 (2.34) Pad Layout .030 (.762) .010/.015 (.254/.381) .100 (2.54) .200 (5.08) .008/.013 (.203/.330) 0°-8° .035 (.889) .500 (12.70) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8024G Rev. C1 5/8/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com