10/100Base-TX Module for Multi-Port Applications ELECTRONICS INC. EPF8130S • Recommended for use with Broadcom 5208 Chip • Significantly Improved Common Mode Attenuation • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Guaranteed to operate with 8 mA DC Bias at 70°C • Transfer Molded Part Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL @ 70°C 100 KHz, 0.1 Vrms 8 mA DC Bias Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 1-80 MHz 100 MHz 150 MHz 1-30 MHz 60 MHz 100 MHz 30-100 MHz 200 MHz 300 MHz 500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -1/-1 -3/-3 -18/-18 -12/-12 -10/-10 -30/-20 -20/-15 -20/-10 -15/--- 1-100 MHz -30 Isolation : 1500 Vrms • Impedance : 100 Ω • Rise Time : 3.0 nS Max. • • Schematic Transmit Channel Receive Channel 1, 9, 11, 19 40, 32, 30, 22 Chip Side Cable Side 2, 10, 12, 20 1:1 Chip Side 39, 31, 29, 21 4, 6, 14, 16 37, 35, 27, 25 3, 8, 13, 18 38, 33, 28, 23 5, 7, 15, 17 Cable Side 36, 34, 26, 24 1CT : 1CT Package 1.120 (28.45) .090 (2.29) .050 (1.27) .085 (2.16) PCA EPF8130S Date Code .480 (12.19) 40 21 .670 Solder Pad Layout (17.02) 1 20 .950 (24.13) .030 (.762) .010/.015 (.254/.381) .260 (6.60) .050 (1.27) .016/.022 (.406/.559) .008/.012 (.203/.305) 0°-8° .035 (.889) .600 (15.24) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8130S Rev. C 5/8/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com