10/100Base-TX Module for Quad-Port Applications ELECTRONICS INC. EPF8137S • Recommended for use with Broadcom 5208 Chip • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Significantly Improved Common Mode Attenuation • Guaranteed to operate with 8 mA DC Bias at 70°C • Transfer Molded Part Electrical Parameters @ 25° C OCL @ 70°C 100 KHz, 0.1 Vrms 8 mA DC Bias Insertion Loss (dB Max.) Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 1-100 MHz 150 MHz 1-30 MHz 60 MHz 100 MHz 30-100 MHz 200 MHz 300 MHz 500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -3/-3 -18/-18 -12/-12 -10/-10 -30/-25 -25/-20 -20/-10 -15/--- 0.1-100 MHz -30 Isolation : 1500 Vrms • Impedance : 100 Ω • Rise Time : 3.0 nS Max. • • Schematic Receive Channel 1, 9, 11, 19 Transmit Channel 40, 34, 30, 24 Chip Side Cable Side 2, 10, 12, 20 37, 31, 27, 21 4, 6, 14, Chip Side 39, 35, 29, 25 38, 33, 28, 23 Cable Side 3, 8, 13, 18 5, 7, 15, 17 1:1 36, 32, 26, 22 1 CT:1CT Package 1.120 (28.45) .090 (2.29) .050 (1.27) .085 (2.16) PCA EPF8137S Date Code .480 (12.19) 40 21 .670 Solder Pad Layout (17.02) 1 20 .950 (24.13) .030 (.762) .010/.015 (.254/.381) .260 (6.60) .050 (1.27) .016/.022 (.406/.559) .008/.012 (.203/.305) 0°-8° .035 (.889) .600 (15.24) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8137S Rev. 1 7/15/02 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com