1000Base-T Module ELECTRONICS INC. EPG4009F • Complies with or exceeds IEEE 802.3 1000Base-T Standards • Guaranteed to operate with 8 mA DC Bias at 0°C to +70°C • 1500 Vrms Isolation Electrical Parameters @ 25° C @ 100 KHz, 0.1 Vrms 8 mA DC bias Insertion Loss (dB Max.) 1-100 MHz 1-30 MHz 40 MHz 350 (Media Side) -1.4 -16 -14.4 OCL (µH Min.) Return Loss (dB Min.) 50 MHz CMRR (dB Min.) -13.1 Crosstalk (dB Min.) 6080 100 MHz 30 MHz 60 MHz 100 MHz 30 MHz 60 MHz 100 MHz -12 -10 -45 -40 -35 -43.5 -37.5 -33 • Impedance : 100 Ω • Schematic 1CT:1CT 1CT:1CT 47, 44, 41, 38 14, 17, 20, 23 1, 4, 7, 10 48, 45, 42, 39 13, 16, 19, 22 36, 33, 30, 27 3, 6, 9, 12 46, 43, 40, 37 15, 18, 21, 24 34, 31, 28, 25 Chip Side Media Side Chip Side Media Side 2, 5, 8, 11 35, 32, 29, 26 Package 1.095 (27.81) .099 (2.51) Pin 1 I.D. PCA EPG4009F Date Code 48 .480 (12.19) .039 (.990) 25 Pad Layout .625 (15.88) 1 .897 (22.78) .285 (7.24) .068 (1.73) .039 (.990) 24 .030 (.762) .010/.015 (.254/.381) .016/.022 (.406/.559) .008/.013 (.203/.330) 0°-8° .035 (.889) .600 (15.24) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSFG4009F Rev. 2 5/5/03 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com