1000Base-T Module ELECTRONICS INC. EPG4006FL • Complies with or exceeds IEEE 802.3 1000Base-T Standards • Guaranteed to operate with 8 mA DC Bias at 0°C to +70°C • Transfer Molded Part • 1500 Vrms Isolation Electrical Parameters @ 25° C OCL (µH Min.) Insertion Loss (dB Max.) Crosstalk (dB Min.) CMRR (dB Min.) Return Loss (dB Min.) @ 100 KHz, 0.1 Vrms 8 mA DC bias 1-80 MHz 100 MHz 150 MHz 200 MHz 1-80 MHz 100 MHz 150 MHz 200 MHz 1-80 MHz 80-200 MHz 500 MHz 1-100 MHz 150 MHz 200 MHz 350 (Media Side) -1.0 -1.1 -1.5 -2.0 -18 -15 -10 -8 -35 -30 -25 -40 -38 -35 Impedance : 100 Ω • Rise Time : 1.75 nS Max. Schematic 1CT:1CT 1CT:1CT 47, 44, 41, 38 14, 17, 20, 23 1, 4, 7, 10 48, 45, 42, 39 13, 16, 19, 22 36, 33, 30, 27 3, 6, 9, 12 46, 43, 40, 37 15, 18, 21, 24 34, 31, 28, 25 Chip Side Media Side Chip Side Media Side 2, 5, 8, 11 35, 32, 29, 26 Package 1.100 (27.94) .102 (2.58) .068 (1.73) .03937 (1.00) PCA EPG4006FL Date Code Pin 1 I.D. 48 .480 (12.19) 1 .9055 (23.00) .03937 (1.00) 24 .030 (.762) .010/.015 (.254/.381) .220 (5.59) 25 Pad Layout .625 (15.88) .016/.022 (.406/.559) .008/.013 (.203/.330) 0°-8° .035 (.889) .600 (15.24) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSFG4006FL Rev. 2 5/15/03 JGD TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com