Surface Mount Power Inductor ELECTRONICS INC. EPI D Series V Features of the EPI “D” Series of SMT Power Inductors µSec. • Virtually no limit on V µSec as long as max. RMS Current Limit • and Temperature Rise Limit are not exceeded • Low loss material ensures operation in high frequency switching • converters, such as Buck, Boost or as output averaging filter inductor I (peak) • Low cost Robust construction to withstand most SMT processes • t • Also suitable for use in high quality filter applications • Primary Specification Part Number Inductance @ 0 Adc DCR (Ω Typ.) EPI1L0303D EPI1L5253D EPI2L2203D EPI3L3173D EPI3L9153D EPI4L7133D EPI6L6123D EPI7L8113D EPI100103D EPI150802D 1.0 ± 25% 1.5 ± 25% 2.2 ± 25% 3.3 ± 15% 3.9 ± 15% 4.7 ± 15% 6.6 ± 15% 7.8 ± 15% 10.0 ± 15% 15.0 ± 15% .0017 .002 .003 .004 .005 .007 .010 .013 .019 .028 Inductance (µH Min.) (@ I sat) 0.83 1.26 1.98 2.80 3.51 4.23 5.94 6.63 9.0 13.5 I Saturation (Amperes) I rms (Amperes) 30 25 20 17 15 13 12 11 10 8 15.0 15.0 12.0 10.0 9.0 8.4 7.5 7.5 6.0 4.4 Package D A B Marking: PCA EPIXXXXXXD E Dimensions Dim. A B C D E F G H D C Min. .732 .309 .309 ----------- (Inches) Max. Nom. .764 .325 .327 ----------- .748 .317 .317 .340 .690 .125 .690 .340 (Millimeters) Min. Max. Nom. 18.60 7.85 7.85 ----------- 19.40 8.25 8.31 ----------- 19.00 8.05 8.05 8.64 17.53 3.18 17.52 8.64 H G Land Pattern Note : 1. Temperature Rise : 15°C Typ. 2. Inductance Change at I Saturation : 10% Max. F PCA ELECTRONICS, INC. 6799 SCHOENBORN ST. NORTH HILLS, CA 91343 CSIXXXXXXD Rev. 1 3/27/01 Product performance is limited to specific parameters. Data subject to change without prior notice. TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com